Teledyne 2103c installation and operation guide Declaration of Conformity

DECLARATION OF CONFORMITY

	Application of Council Directive:			89/336/EEC – The EMC Directive
				73/23/EEC – The Low Voltage Directive
		Manufacturer's Name: Teledyne Isco, Inc.
		Manufacturer's Address:		4700 Superior, Lincoln, Nebraska 68504 USA
				Mailing Address: P.O. Box 82531, Lincoln, NE 68501
	Equipment Type/Environment: Laboratory Equipment for Light Industrial/Commercial Environments
		Trade Name/Model No: 2103 Modem Module
		Year of Issue:		2001
Standards to which Conformity is Declared:				FCC part is Sub part B, IC ES-003, En 55022:1998, EN 55024:1998 EMC
						Requirements for Information			Technology Equipment
				EN 60950 Safety Requirements for Information Technology Equipment
				FCC Part 68				rmity
Standard		Description						o		Performance Criteria
								Severity Applied
EN61000-4-2		Electrostatic Discharge						Conf		A
					Level 2 - 4kV contact discharge
					Level 3 - 8kV air discharge					A
EN61000-4-3		Radiated RF Immunity					of			A
					80 MHz to 1000MHz 80% AM at 1kHz
					on
					Level 1 – 10V/m
*EN61000-4-6		Conducted RF on I/O lines		Declara150 kHz to 80 MHz,						*C
EN61000-4-4		Electrical Fast Transient			Levelti	1 – 1kV on I/O lines				A
EN61000-4-5		Surge on I/O Lines			1kV common mode,					A
					0.5KV differential mode
			CE		3V rms, 80% modulated
CISPR11/		RF Emissions			Group 1, Class A Industrial, Scientific, and
EN 55011					Medical Equipment

*Between 5 and 7 mega Hz the modem will inadvertently disconnect from the computer. A manual reconnection procedure is required to restablish a connection.

We, the undersigned, hereby declare that the design of the equipment specified above conforms to the above Directive(s) and Standards as of July 1, 2001.

William Foster

USA Representative

William Foster

Director of Engineering

Teledyne Isco, Inc.

4700 Superior Street

Lincoln, Nebraska 68504

Phone: (402) 464-0231

Fax: (402) 464-4543

60-2002-156

Rev. B