Teledyne 2103c installation and operation guide Modem Cable

	2103 Modem Module
	Section 2 Installation and Operation
2.4.1 Modem Cable	After you have installed the 2103 on the stack, you need to attach
Connection	the modem cable so the module can be connected to a phone line.
	Remove the connector cap from the 5-pin circular modem cable
	connector on the right hand side of the 2103. Attach the modem
	cable to the connector (Figure 2-1), and then connect the other
	end of the modem cable to a standard telephone jack (USOC
	RJ-11C).

Figure 2-1 Connecting the Modem Cable

2.4.2Connection Without If desired, the 2103 can be connected to a standard telephone line

the Modem Cable	by attaching the telephone line cable to a connector that mates
	with the 2103’s 5-pin circular modem cable connector (Figure
	2-2). Be sure that you have a water tight seal on your wire con-
	nections.
	For your reference, the modem cable uses a 5-pin amphenol
	socket, MS3106A-5S.

Figure 2-2 2103 Modem Cable Connector

2-5