Connecting Your VCR or Laser Disc Player
VIDEO
IN
Video cable (not supplied)
Audio equipment
AUDIO IN
L R
VCR/ Laser disc player
AUDIO OUT | |
L | R |
VIDEO OUT
Audio cable (not supplied)
Use common RCA cables (not provided) to connect your VCR, laser disc player or document camera to your projector.
To make these connections, simply:
1.Turn off the power to the projector and VCR, laser disc player or document camera.
2.Connect one end of your RCA cable to the video output connector on the back of your VCR or laser disc player, connect the other end to the Video input on your projector. Use an audio cable (not supplied) to connect the audio from your VCR or laser disc player to your audio equipment (if your VCR or laser disc player has this capability). Be careful to keep your right and left channel connections correct for stereo sound.
3.Turn on the projector and the VCR or laser disc player.
NOTE: Refer to your VCR or laser disc player owner's manual for more informa- tion about your equipment's video output requirements.
NOTE: An image may not be displayed correctly when a Video or
Connecting the Supplied Power Cable
Connect the supplied power cable to the projector.
First connect the supplied power cable's
DVI IN
AUDIO
RGB2 IN
RGB1 IN
AUDIO
B/Cb G/Y
AUDIO
R
L/MONO
AUDIO
1 2
| REMOTE |
| PC CONTROL |
) | R |
USB(MOUSE/HUB | L/MONO |
| AUDIO |
V |
|
H |
|
| AUDIO OUT |
| AC IN |
RGB OUT |
|
| AUDIO |
L/MONO | R |
| |
| AUDIO |
VIDEO IN |
|