Dukane 8805 user manual Operation Using an Http Browser, Overview, Preparation Before Use

Page 61

Operation Using an HTTP Browser

Overview

The use of HTTP server functions will allow control of the projector from a web browser without the installation of special software. Please be sure to use “Microsoft Internet Explorer 4.x” or a higher version for the web browser. (This device uses “JavaScript” and “Cookies” and the browser should be set to accept these functions. The setting method will vary depending on the version of browser. Please refer to the help files and the other information provided in your software.)

NOTE:

*The use of HTTP server functions is not available during Standby mode.

*The display’s or button’s response can be slowed down or operation may not be accepted depending the settings of your network. Should this happen, con- sult your network administrator.

*The projector may not respond if its buttons are repeatedly pressed in rapid intervals. Should this happen, wait a moment and repeat. If you still can’t get any response, pull out and then re-insert the LAN card.

*Do not use the HTTP Server functions and the Dynamic Image Utility included on the supplied CD-ROM. Using both at the same time may result in a connec- tion failure or slow response.

Access is gained to the HTTP server functions by specifying http:// <the projector’s IP address> /index.html

in the entry column of the URL.

Preparation Before Use

Make network connections and set up the projector and confirm that it is complete before engaging in browser operations. (See “Setting LAN Mode” on page E-48.)

Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and the setting method. Although the type of proxy server will be a factor, it is possible that items that have actually been set will not be displayed depending on the effectiveness of the cache, and the contents set from the browser may not be re- flected in operation. It is recommended that a proxy server not be used unless it is unavoidable.

Handling of the Address for Operation via a Browser

Regarding the actual address that is entered for the address or entered to the URL column when operation of the projector is via a browser, the host name can be used as it is when the host name corresponding to the IP address of the projector has been registered to the domain name server by a network administrator, or the host name corresponding to the IP address of the projector has been set in the “HOSTS” file of the computer being used.

Example 1: When the host name of the projector has been set to “pj.nec.co.jp”, http://pj.nec.co.jp/index.html is specified for the ad- dress or the entry column of the URL.

Example 2: When the IP address of the projector is “192.168.73.1”, access is gained to the HTTP server functions by specifying http://192.168.73.1/index.html for the address or the entry column of the URL.

Structure of the HTTP Server

Power: This controls the power of the projector.

On

Power is switched on.

Off

Power is switched off.

Volume: This controls the volume of the projector.

....................

Increments the volume adjustment value.

....................

Decrements the volume adjustment value.

Mute: This controls the mute function of the projector.

All On

Mutes each of the video, audio, and on-screen dis-

 

play functions.

All Off

Cancels the muting of each of the video, audio, and

 

on-screen display functions.

Picture On

Mutes the video.

Picture Off

Cancels the video muting.

Sound On

Mutes the audio.

Sound Off

Cancels the audio muting.

OSD On

Mutes the on-screen display.

OSD Off

Cancels the muting of the on-screen display.

Picture: Controls the video adjustment of the projector.

Brightness

.. Increments the brightness adjustment value.

Brightness

.. Decrements the brightness adjustment value.

Contrast

..... Increments the contrast adjustment value.

Contrast

..... Decrements the contrast adjustment value.

Color

Increments the color adjustment value.

Color

Decrements the color adjustment value.

Hue

Increments the hue adjustment value.

Hue

Decrements the hue adjustment value.

Sharpness

. Increments the sharpness adjustment value.

Sharpness

. Decrements the sharpness adjustment value.

*The functions that can be controlled will vary depending on the sig- nal being input to the projector.

Source Select: This switches the input connector of the projector.

RGB1

Switches to the RGB 1 connector.

RGB2

Switches to the RGB 2 connector.

Video

Switches to the Video connector.

S-Video

Switches to the S-Video connector.

DVI(DIGITAL) . Switches to the DVI connector (not available on MT860)

Viewer

Switches to the Viewer.

LAN

Switches to a LAN signal.

Projector Status: This displays the condition of the projector. Remaining Lamp Time .. Displays the remaining life of the lamp as a

percentage.

Lamp Hour Meter

Displays how many hours the lamp has been

 

used.

Projector Usage

Displays how many hours the projector has

 

been used.

Filter Usage

Displays how many hours the filter has been

 

used.

Error Status

Displays the status of errors occurring within

 

the projector.

Refresh

Updates the display of the following condi-

 

tions.

E-61

Page 60 Page 62
Image 61
Page 60 Page 62
Contents Model Safety Cautions Lamp Replacement Fire and Shock PrecautionsWhats in the Box? Table of Contents Introduction Features youll enjoyIntroduction to the Projector Congratulations on Your Purchase of This ProjectorAttaching the lens cap Part Names of the ProjectorCarrying the Projector Select Top FeaturesTerminal Panel Features On the screen using the Select Part Names of the Remote ControlRGB Viewer Remote Control Precautions Battery InstallationOperating Range for Wireless Remote Control Using the Remote Control in Wired OperationSetting Up the Screen and the Projector Installation and ConnectionsSelecting a Location Do not attempt to install the projector yourself Distance ChartThrow Distance and Screen Size Reflecting the ImageConnecting Your PC or Macintosh Computer When Viewing a DVI Digital SignalConnecting to RGB 2 in connectors Connecting Your PC with a DVI ConnectorTo connect Scart output RGB Connecting an External MonitorDVD player Connecting Your DVD PlayerConnecting the Supplied Power Cable Connecting Your VCR or Laser Disc PlayerTurning on the Projector Projecting AN Image Basic OperationUsing the Remote Control Adjusting the Picture Size and PositionAdjust the Tilt Foot Selecting a SourceUsing Auto Focus not available on MT860 When using the USB connected to the projectorFocus Use the Focus Button +/- to obtain the best focusConfirmation screen is displayed When using the remote control or cabinet buttonsUsing the Laser Pointer Turning Up or Down VolumeAdjusting the Image Using Auto Adjust Optimizing RGB Picture AutomaticallyTurning off the Projector Setting the function switchTo turn off the projector Using the Remote Mouse Function Convenient FeaturesFreezing a Picture Using the PointerGetting the On-line Help Operate the Menus using the USB mouse Using the USB Mouse Using the USB HUB FunctionMaking Freehand Drawings on a Projected Image ChalkBoard Changing Background LogoMaking the Most out of the Viewer Function Using the ViewerOperating the Viewer Function from the Projector playback When the tool bar is not displayedProjecting slides Viewer Switching to Slides Directly from Other Input Modes Auto Play ModeViewing Digital Images PreparationsDeleting Captured Images Using the PC Card Files Fucntion PC Card FilesTo delete captured images Using the Menus Using ON-SCREEN MenuDefault Custom Menu items are Basic Menu OperationAdvanced Menu Menu treeDefault Source Select Operation Mode SelectCommunication Speed WEP Menu Elements Menu Descriptions & Functions Entering Alphanumeric Characters by Using the MenuSource Select Picture not available for Viewer and LAN Entry Edit CommandSound Image OptionsPicture Management Projector Options Using Adapting Color Correction Wall Color Correction Button to move the yellow box to select a Menu Setup Resolution manually User can adjust the image display functions HoriSelecting Lamp Mode and Lamp Type Lamp Setting Selecting Auto Functions not available on MT860 Selecting Aspect Ratio and Position for Screen ScreenNetwork Type required for wireless only Setting LAN ModeNications may be monitored by someone WEP for Wireless onlyUses 64-bit datalength for secure transmission Pared to use of 64bit datalength encryptionStatus Setting a PasswordEntry DeleteSecurity To enable Security, use the SelectTo delete PC card data you registered Help Returning to Factory DefaultTools Replacing the Lamp MaintenanceTo replace the lamp Standard life lamp 465-8805 or Extended life lamp MT60LPSCleaning or Replacing the Filter CleaningCleaning the Cabinet and the Lens Vacuum the filter-through the filter coverPower Indicator TroubleshootingStatus Indicator Lamp IndicatorWhen using the Viewer function Common Problems & Solutions Check These ItemsContents of PC Card are damaged Image isn’t square toModel Number 8805 Optical SpecificationsPin Assignments of D-Sub RGB Input Connector Cabinet DimensionsMini D-Sub 15 Pin Connector Pin No RGB Signal Analog YCbCr SignalCompatible Input Signal List Using Software Keyboard PC Control Connector D-SUB 9PPC Control Codes and Cable Connection Cable ConnectionOverview Operation Using an Http BrowserPreparation Before Use Handling of the Address for Operation via a BrowserPage Dukane Corporation 584-5156 676-2486676-2487 584-0984
Top Page Image Contents