Peavey A/A-8P Architectural Engineering Specifications, Back Panel, #80302356 Printed U.S.A /96

Page 2

ARCHITECTURAL &

ENGINEERING

SPECIFICATIONS

The Peavey Architectural Acoustics A/A-8P Mic Preamp shall have eight channels with transformer balanced inputs. The outputs will be electronically balanced. Signal inputs shall be selectable for either low level (mic) or high level (line) signals. Phantom power will be available for each channel with a

defeat switch per channel located on the rear panel. Channel level controls shall be mounted on the front panel and will be flush-mount, tamper resistant, screwdriver slotted. Two signal status indicators per channel will be located on the front panel: a green signal present LED and a red clip LED. There shall be a level limiter per channel, defeatable by a switch located on the rear panel. The output threshold of this limiter shall

be optimized for input to the MediaMatrix MM-8840 and MM-8830. The connection to the A/A-8P Preamp input and output shall be via "Euro" type connectors. The power on LED shall be located on the front panel. The unit shall be 1-3/4" high using industry standard 19" rack spacing. The weight of the unit shall be 8.6 lbs. The unit shall be a Peavey Architectural Acous- tics Division model A/A-8P™.

Back Panel

LIMITED WARRANTY

Peavey Electronics Corporation warrants to the original purchaser of this new Architectural Acoustics product that it is free from defects in material and workmanship. If within one (1) year from date of purchase a properly installed product proves to be defective and Peavey is notified, Peavey will repair or replace it at no charge. (Note: Batteries and patch cords not covered.) “Original pur chaser” means the customer for whom the product is originally installed.

Damage resulting from improper installation, interconnection of a unit or system of another manufacturer, accident or unreasonable use, neglect or any other cause not arising from defects in material and workmanship is not covered by this warranty. The warranty is valid only as to products purchased and installed in the United States and Canada.

THIS LIMITED WARRANTY IS IN LIEU OF ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE. UNDER NO CIRCUMSTANCES WILL PEAVEY BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGES OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT, EVEN IF PEAVEY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. THIS LIMITED WARRANTY IS THE ONLY EXPRESSED WARRANTY ON THIS PRODUCT, AND NO OTHER STATEMENT, REPRESENTATION, WAR- RANTY, OR AGREEMENT BY ANY PERSON SHALL BE VALID OR BINDING UPON PEAVEY.

Peavey’s liability to the original purchaser for damages for any cause whatsoever and regardless of the form of action is limited to the actual damages up to the greater of Five Hundred Dollars ($500) or an amount equal to the purchase price of the product that caused the damage or that is the subject of or is directly related to the cause of action. This limitation of liability will not apply to claims for personal injury or damage to real property or tangible personal property allegedly caused by Peavey’s negligence. For information on service under this warranty, call a Peavey customer service representative at (601) 483-5376.

®

ARCHITECTURAL ACOUSTICS®

Features and specifications subject to change without notice.

 

A Division of Peavey Electronics Corporation

 

 

711 A Street / Meridian, MS 39301 / U.S.A./ (601) 483-5376 /

Fax (601) 486-1154

TM®

©1995

#80302356

 

Printed U.S.A. 6/96

Image 2
Contents Description InputDivision of Peavey Electronics Corporation Architectural Engineering SpecificationsBack Panel Street / Meridian, MS 39301 / U.S.A./ 601 Fax 601

A/A-8P specifications

The Peavey A/A-8P is an advanced audio solution designed to meet the demands of both professional and amateur audio applications. Renowned for its high performance and exceptional reliability, the A/A-8P is a powered speaker that caters to musicians, DJs, and sound engineers looking for clarity and power in their audio systems.

One of the main features of the A/A-8P is its power efficiency. With a robust built-in amplifier, it delivers an impressive output, allowing for concert-level volumes without sacrificing sound quality. The speaker utilizes class D amplification technology, which not only enhances performance but also reduces weight and heat generation. This makes the speaker manageable for transport while ensuring it operates efficiently during extended use.

Another notable characteristic of the Peavey A/A-8P is its 8-inch woofer and 1-inch tweeter configuration, which together provide a well-rounded frequency response. The woofer handles low to mid-range sounds with remarkable clarity, while the tweeter excels in reproducing high frequencies, ensuring that even the most subtle details of a performance are heard. This combination allows for an expansive sound stage, making it suitable for a variety of applications, from small venues to larger gatherings.

The speaker also features a versatile input panel with multiple connectivity options, including XLR, TRS, and RCA inputs. This adaptability makes it easy to integrate with various sound systems and components, allowing users to connect microphones, instruments, and playback devices effortlessly. Additionally, the built-in EQ controls enable users to tailor the audio output to fit their specific needs and preferences.

Durability is a key aspect of the A/A-8P. Constructed with rugged materials, it is designed to withstand the rigors of regular use while maintaining its aesthetic appeal. The grille provides protection for the components, ensuring longevity even in challenging environments.

In summary, the Peavey A/A-8P powered speaker stands out with its powerful amplification, high-quality sound reproduction, and versatile connectivity options. Whether used in live music settings, DJ applications, or as part of a home sound system, the A/A-8P delivers exceptional audio performance, making it a reliable choice for those serious about sound quality. Peavey continues to uphold its reputation for producing robust and innovative audio equipment, and the A/A-8P exemplifies these values impeccably.