1. Introduction
Top Features
3
WARNING 
5 8
7
MENU
4
O | W |
|
E | ||
P |
| R |
LAMP 
1 2
INPUT |
|
AUTO PC |
|
VOL | VOL |
- | + |
BACK
6 9 10
1.POWER Button ( 
)
Use this button to turn the power on and off when the main power is supplied and the projector is in standby mode.
To turn on the projector, press and hold this button for about 1 second. To turn off the projector, press this button twice.
2.POWER Indicator
Detecting the Signal Automatically
Press and hold the INPUT button for a minimum of 2 seconds, the projector will search for the next avail- able input source. Each time you press and hold the INPUT button for a minimum of 2 seconds, the input source will change as follows:
Computer 1 → Computer 2 → Video →
When this indicator is green, the projector is on; when this indicator is orange, it is in standby mode. See the Power Indicator section on page 53 for more details.
3.WARNING Indicator
If this light blinks red rapidly, it indicates that an error has occurred, the lamp cover is not attached properly or the projector has overheated. If this light remains orange, it indicates that you have pressed a cabinet key while the Key lock is enabled. See the WARNING Indicator section on page 53 for more details.
4.LAMP Indicator
If this light blinks red rapidly, it's warning you that the lamp has reached the end of its usable life. After this light appears, replace the lamp as soon as possible (See page 50). If this is lit green continually, it indi- cates that the lamp mode is set to Quiet. See the Lamp Indicator section on page 53 for more details.
5.INPUT Button
Selecting from INPUT List
Press and quickly release the INPUT button to dis- play the INPUT list. Each time the INPUT button is pressed, the input source will change as follows: "Computer 1", "Computer 2", "Video" (VCR or laser disc player),
6.AUTO PC Button
Use this button to adjust an RGB source for an opti- mal picture (See page 27).
7.MENU Button Displays the menu.
8.SELECT 
/ VOL (+/–) Buttons
: Use these buttons to select the menu of the item you wish to adjust.
: Use these buttons to change the level of a se- lected menu item. A press of the 
button ex- ecutes the selection. When no menus appear, these buttons work as a volume control.
9.OK Button
Executes your menu selection and activates items selected from the menu.
10.BACK Button
Pressing this button will return to the previous menu. While you are in the main menu, pressing this button will close the menu.
6