Canon LV-S2 owner manual Lamp Handling Precautions, Appendix Lamp Replace Counter

Page 38

APPENDIX

LAMP REPLACE COUNTER

Be sure to reset the Lamp Replace Counter after the Lamp Assembly is replaced. When the Lamp Replace Counter is reset, the LAMP REPLACE Indicator stops lighting.

1

Turn the projector on, press the MENU button and the ON-

 

SCREEN MENU will appear. Press the POINT LEFT/RIGHT

 

button(s) to move the red frame to the SETTING Menu icon

 

(refer to page 35, 36).

2

Press the POINT DOWN button to move the red frame to

 

“Lamp counter reset” and then press the SET button. The

 

message "Lamp replace counter reset?" is displayed. Move

 

the red arrow to [Yes] and then press the SET button.

3

Another confirmation dialog box appears and select [Yes] to

reset the Lamp Replace Counter.

Move the red frame to Lamp counter reset and then press the SET button. The message “Lamp replace counter reset?” is displayed.

NOTE : Do not reset the Lamp Replace Counter until after the Projection Lamp is replaced.

LAMP HANDLING PRECAUTIONS

This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard.

●Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a shorter period of time than other similar lamps.

●If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE INDICATOR lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.

( Follow carefully the instructions in the LAMP REPLACEMENT section of this manual. ) Continuous use of the lamp with the LAMP REPLACE INDICATOR lighted may increase the risk of lamp explosion.

●A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in which the projector and lamp are being used.

IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.

If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one should check the inside of the projector except those who are authorized trained technicians and who are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken glass.

38

Downloaded from www.Manualslib.com manuals search engine

Page 37 Page 39
Image 38
Page 37 Page 39
Contents LV-S2 To the Owner Safety Instructions Voor de klanten in NederlandCompliances Federal Communication Commission NoticeTable of Contents Features and Design Wide Zoom LensHOT AIR Exhausted PreparationNomenchtor For Continental Europe SETTING-UP the ProjectorConnecting AC Power Cord Room Light Adjustable FeetPreparation Positioning the Projector Preparation Mounting the Lens Cover Moving the ProjectorVideo Connecting the ProjectorTerminals of the Projector AV AudioConnecting to a Computer Terminals ProjectorConnecting Video Equipment Audio OUTOperation of the Remote Control Unit Before OperationBefore Operation Operating Range Remote Control Unit Battery InstallationBattery TOP Controls and Indicators Ready IndicatorFlow of ON-SCREEN Menu Operation HOW to Operate the ON-SCREEN MenuOperating the ON-SCREEN Menu Before Operation Menu BAR Guide WindowTurning on the Projector Basic OperationTurning on / OFF the Projector Turning OFF the ProjectorFocus Adjustment Adjusting the ScreenZoom Adjustment Keystone AdjustmentBasic Operation No Show Function Sound AdjustmentTimer Function Direct OperationSelecting the Computer System Computer InputSelecting the Input Source Select the Computer System ManuallyFreq Computer Input Compatible Computer SpecificationsResolution KHzPC Adjust Menu PC AdjustmentAuto PC Adjustment Auto PC AdjComputer Input Manual PC Adjustment Full screen Display areaDisplay area H Image Level Select Menu Picture Image AdjustmentImage Level Select Direct Image Select MenuComputer Input Image Level Adjustment Image Adjust MenuPicture Screen Adjustment Screen MenuVideo Input VideoAV System Menu Video or S-VIDEO Selecting the Video SystemAuto AV System Menu Component VideoCinema Video Input Image Level Adjustment Reset all adjustment to the previous figure Setting Menu SettingSetting Menu Remote control To change the code of the Remote Control UnitPower management Lamp counter resetLamp Replace Lamp ReplacementAppendix Lamp Handling Precautions Appendix Lamp Replace CounterCleaning Projection Lens MaintenanceAIR Filter Care and Cleaning RecommendationTroubleshooting Remote Control Unit Does not workTechnical Specifications Optional PartsUSB Connector Series B Appendix Configurations of the TerminalsControl Port Connector Computer Input Terminal AnalogCanon U.S.A., INC
Related manuals
Manual 44 pages 63.24 Kb

LV-S2 specifications

The Canon LV-S2 is a versatile and portable multimedia projector that caters to both professional and educational environments. This powerful device is designed to deliver bright and vibrant images, making it ideal for presentations, lectures, and even home entertainment.

One of the standout features of the Canon LV-S2 is its impressive brightness level, rated at 3000 lumens. This high brightness allows the projector to perform well in various lighting conditions, ensuring that images remain clear and visible even in well-lit rooms. This makes it an excellent choice for classrooms and conference rooms where ambient light may be present.

Another notable characteristic of the LV-S2 is its native SVGA resolution of 800 x 600 pixels. While this resolution may seem modest compared to some higher-end models, it is sufficient for displaying standard definition content and is compatible with various formats, ensuring that users can easily connect it to different devices.

The LV-S2 employs DLP (Digital Light Processing) technology, which is known for its reliability and color accuracy. DLP projectors tend to produce sharper images with better contrast compared to traditional LCD models. This technology also minimizes the risk of color degradation over time, providing long-lasting performance without compromising on image quality.

Portability is another key feature of the LV-S2. Weighing in at just 2.3 kg, it is easy to transport, making it a great option for mobile professionals or educators who need to set up presentations in different locations. The compact design allows it to fit easily into a laptop bag, enabling users to take it wherever their work requires.

Connectivity options are abundant with the LV-S2. It includes HDMI, VGA, and composite video inputs, allowing for seamless connections to a variety of devices such as laptops, DVD players, and gaming consoles. This versatility ensures that users can quickly switch between different media sources without hassle.

In terms of lamp life, the LV-S2 boasts an impressive lifespan of up to 6000 hours in eco mode. This extended lamp life significantly reduces maintenance costs, ensuring that users can enjoy uninterrupted service for extended periods without the worry of frequent bulb replacements.

In summary, the Canon LV-S2 is an excellent choice for those in need of a reliable, portable, and high-quality projector. Its bright output, solid resolution, DLP technology, and extensive connectivity options make it a valuable tool for various applications, ensuring that users can deliver effective and engaging presentations wherever they go.
Top Page Image Contents