Canon LV-S2 owner manual Picture Screen Adjustment, Screen Menu

Page 29

COMPUTER INPUT

3 Store

To store the manually preset image level, move the red frame to the Store icon and press the SET button. The message “OK?” will appear. Select [Yes] to store the manual adjustment.

To set this manual adjustment, select the Custom by pressing the IMAGE button or through the IMAGE SELECT MENU (refer to P27).

Other icons operate as follows.

Reset

Reset all adjustment to previous figure.

Quit

Store icon

Closes the IMAGE MENU.

“OK?” message

Move the red arrow pointer to [Yes] and then press the SET button.

PICTURE SCREEN ADJUSTMENT

This projector has a picture screen resize function, which enables you to display the desirable image size.

1

Press the MENU button and the ON-SCREEN MENU will

appear. Press the POINT LEFT/RIGHT button(s) to move the

 

red frame to the SCREEN Menu icon.

2

Press the POINT DOWN button and move the red frame to the

function that you want to select and then press the SET button.

Normal

Provides image to fit screen size.

True

Provides image in its original size. When the original image size is larger than screen size (800 x 600), this projector enters “Digital zoom +” mode automatically.

Wide

Provides an image to fit the wide video aspect ratio (16 : 9) by expanding image width uniformly. This function can be used for providing a squeezed video signal at 16 : 9.

Digital zoom +

When Digital zoom + is selected, the ON-SCREEN MENU disappears and the message “D. Zoom +” is displayed. Press the SET button to expand image size. And press the POINT UP/DOWN/LEFT/RIGHT button(s) to pan the image. The panning function can work only when the image is larger than screen size.

A projected image can be also expanded by pressing D.ZOOM W (Wide) button on Remote Control Unit.

Digital zoom –

SCREEN MENU

SCREEN Menu icon

Move the red frame to the function and press the SET button.

NOTE

This SCREEN Menu cannot be operated when “1035i (HDTV)” or “1080i (HDTV)” is selected on PC SYSTEM Menu (P22).

Wide cannot be selected when “720p (HDTV)” is selected on PC SYSTEM Menu (P22).

True and Digital zoom +/– cannot be selected when “RGB” is selected on PC SYSTEM Menu (P22).

This projector cannot display any resolution higher than 1280 X 1024. If your computer’s screen resolution is higher than 1280 X 1024, lower the resolution before connecting projector.

Digital zoom – cannot be operated when the image resolution is SXGA (1280 x 1024).

The image data in other than SVGA (800 x 600) is modified to fit the screen size.

When Digital zoom – is selected, the ON-SCREEN MENU disappears and the message “D. Zoom –” is displayed. Press the SET button to compress image size.

A projected image can be also compressed by pressing the D.ZOOM T (Tele) button on Remote Control Unit.

To cancel the Digital Zoom +/– mode, press any button except D.ZOOM W/T, SET, and POINT buttons.

The panning function may not operate properly if the computer system set on PC ADJUST Menu is used.

29

Downloaded from www.Manualslib.com manuals search engine

Image 29
Contents LV-S2 To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Wide Zoom Lens Features and DesignHOT AIR Exhausted PreparationNomenchtor For Continental Europe SETTING-UP the ProjectorConnecting AC Power Cord Room Light Adjustable FeetPreparation Positioning the Projector Moving the Projector Preparation Mounting the Lens CoverTerminals of the Projector Connecting the ProjectorVideo AV AudioTerminals Projector Connecting to a ComputerAudio OUT Connecting Video EquipmentBefore Operation Operation of the Remote Control UnitBefore Operation Operating Range Remote Control Unit Battery InstallationBattery Ready Indicator TOP Controls and IndicatorsFlow of ON-SCREEN Menu Operation HOW to Operate the ON-SCREEN MenuOperating the ON-SCREEN Menu Guide Window Before Operation Menu BARTurning on / OFF the Projector Basic OperationTurning on the Projector Turning OFF the ProjectorZoom Adjustment Adjusting the ScreenFocus Adjustment Keystone AdjustmentTimer Function Sound AdjustmentBasic Operation No Show Function Direct OperationSelecting the Input Source Computer InputSelecting the Computer System Select the Computer System ManuallyResolution Computer Input Compatible Computer SpecificationsFreq KHzAuto PC Adjustment PC AdjustmentPC Adjust Menu Auto PC AdjComputer Input Manual PC Adjustment Full screen Display areaDisplay area H Image Level Select Direct Picture Image AdjustmentImage Level Select Menu Image Select MenuImage Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentVideo Video InputAuto Selecting the Video SystemAV System Menu Video or S-VIDEO AV System Menu Component VideoCinema Video Input Image Level Adjustment Reset all adjustment to the previous figure Setting Menu SettingSetting Menu Power management To change the code of the Remote Control UnitRemote control Lamp counter resetLamp Replace Lamp ReplacementAppendix Appendix Lamp Replace Counter Lamp Handling PrecautionsAIR Filter Care and Cleaning MaintenanceCleaning Projection Lens RecommendationTroubleshooting Does not work Remote Control UnitOptional Parts Technical SpecificationsControl Port Connector Appendix Configurations of the TerminalsUSB Connector Series B Computer Input Terminal AnalogCanon U.S.A., INC
Related manuals
Manual 44 pages 63.24 Kb

LV-S2 specifications

The Canon LV-S2 is a versatile and portable multimedia projector that caters to both professional and educational environments. This powerful device is designed to deliver bright and vibrant images, making it ideal for presentations, lectures, and even home entertainment.

One of the standout features of the Canon LV-S2 is its impressive brightness level, rated at 3000 lumens. This high brightness allows the projector to perform well in various lighting conditions, ensuring that images remain clear and visible even in well-lit rooms. This makes it an excellent choice for classrooms and conference rooms where ambient light may be present.

Another notable characteristic of the LV-S2 is its native SVGA resolution of 800 x 600 pixels. While this resolution may seem modest compared to some higher-end models, it is sufficient for displaying standard definition content and is compatible with various formats, ensuring that users can easily connect it to different devices.

The LV-S2 employs DLP (Digital Light Processing) technology, which is known for its reliability and color accuracy. DLP projectors tend to produce sharper images with better contrast compared to traditional LCD models. This technology also minimizes the risk of color degradation over time, providing long-lasting performance without compromising on image quality.

Portability is another key feature of the LV-S2. Weighing in at just 2.3 kg, it is easy to transport, making it a great option for mobile professionals or educators who need to set up presentations in different locations. The compact design allows it to fit easily into a laptop bag, enabling users to take it wherever their work requires.

Connectivity options are abundant with the LV-S2. It includes HDMI, VGA, and composite video inputs, allowing for seamless connections to a variety of devices such as laptops, DVD players, and gaming consoles. This versatility ensures that users can quickly switch between different media sources without hassle.

In terms of lamp life, the LV-S2 boasts an impressive lifespan of up to 6000 hours in eco mode. This extended lamp life significantly reduces maintenance costs, ensuring that users can enjoy uninterrupted service for extended periods without the worry of frequent bulb replacements.

In summary, the Canon LV-S2 is an excellent choice for those in need of a reliable, portable, and high-quality projector. Its bright output, solid resolution, DLP technology, and extensive connectivity options make it a valuable tool for various applications, ensuring that users can deliver effective and engaging presentations wherever they go.