Canon LV-S1 owner manual Preparation, Name of Each Part of Projector, HOT AIR Exhausted

PREPARATION

NAME OF EACH PART OF PROJECTOR

FRONT	INFRARED	SPEAKER
	REMOTE RECEIVER
	PROJECTION LENS

FOCUS RING

ZOOM LEVER

LENS COVER

BACK

TOP CONTROLS

AND INDICATORS

BOTTOM

AIR INTAKE VENTS

AND AIR FILTERS

POWER CORD

EXHAUST VENTS CONNECTOR

HOT AIR EXHAUSTED !

Air blown from Exhaust Vents is hot. When using or installing projector, following precautions should be taken.

●Do not put any flammable object near these vents.

●Keep front grills at least 3’(1m) away from any object, especially heat-sensitive object.

●Do not touch this area, especially screw and metallic part. This area will become hot while a projector is used.

This projector detects internal temperature and automatically controls operating power of Cooling Fans.

TERMINALS

AND CONNECTORS

AIR INTAKE VENTS (Back and Bottom)

This projector is equipped with Cooling Fans for protection from overheating. Pay attention to the following to ensure proper ventilation and avoid a possible risk of fire and malfunction.

● Do not cover vent slots.

● Keep back and bottom clear of any object. Obstructions may block cooling air.

ADJUSTABLE FEET

AND

FEET LOCK LATCHES

LAMP COVER

7