CMA351 | Installation Instructions |
|
|
7.Thread one 1 1/2" NPT pipe into lower Swivel Adapter (A). (See Figure 4)
8.Secure lower 1 1/2" NPT pipe to swivel adapter (A) using one set screw (G). (See Figure 4)
WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the combined weight of all components located between the CMA351 up to (and including) the display/projector does not exceed 500 lbs (226.8 kg).
The weight capacity of the CMA351 may be LIMITED to the lowest weight capacity of any other component located between the CMA351 and the supporting structure!
X1 |
6 |
X1 |
Figure 4
9.Rotate the bottom portion of the
10.Insert one Phillips pan head screw (E) in the nearest threaded hole in stop plate (B). (See Figure 5)
(E) X1 |
(B) X1 |
Second Stop Location |
Figure 5
11. Tighten two lock nuts (D). (See Figure 6)
(D) X2 |
Figure 6
6