Dell S300 manual Adjusting the Projected Image, Raising the Projector Height

3 To power off the projector quickly, press the Power button and hold for 1 second while the projector’s cooling fans are still running.

NOTE: Before you turn on the projector again, wait for 60 seconds to allow the internal temperature to stabilize.

4 Disconnect the power cord from the electrical outlet and the projector.

Adjusting the Projected Image

Raising the Projector Height

1 Raise the projector to the desired display angle, and use the front two tilt adjustment wheel to fine-tune the display angle.

2 Use the two tilt adjustment wheel to fine-tune the display angle.

Lowering the Projector Height

1 Lower the projector, use the front two tilt adjustment wheel to fine-tune the display angle.

1

2

Front tilt adjustment wheel (Angle of tilt: -1 to 4 degree)

Tilt adjustment wheel

Using Your Projector

21