Dell M209X manual Using the On-Screen Display, Between PC mode , Movie mode , Game Mode

8	Page down	Press to move to next page.
9	Video mode	The Dell M209X Micro-projector has preset
		configurations that are optimized for displaying
		data (PC Graphics) or video (movies, games,
		etc.). Press the Video Mode button to toggle
		between PC mode, Movie mode, Game Mode,
		sRGB, or CUSTOM mode (for user to setup and
		save preferred settings). Pressing the Video Mode
		button once will show the current display mode.
		Pressing the Video Mode button again will switch
		between modes.
10	Blank screen	Press to hide/unhide the image.
11	Up	Press to select OSD items.
12	Left	Press to adjust the OSD setting.
13	Menu	Press to activate the OSD.
14	Volume up	Press to increase the volume.
15	Laser	Point the remote control at the screen, press and
		hold the laser button to activate the laser light.
16	Volume down	Press to decrease the volume.
17	Keystone adjustment	Press to adjust image distortion caused by tilting
		the projector. (+40/-35 degrees)
18	Source	Press to switch between Analog RGB, Composite,
		Component (YPbPr, via VGA), HDMI, and S-
		video sources.
19	Auto adjust	Press to synchronize the projector with the input
		source. Auto adjust does not operate if the OSD
		is displayed.
20	Keystone adjustment	Press to adjust image distortion caused by tilting
		the projector. (+40/-35 degrees)

Using the On-Screen Display

The projector has a multi-language On-Screen Display (OSD) that can be displayed with or without an input source present.

In the Main Menu, press or to navigate through the tabs. Press the Enter button on the control panel or the remote control to select a submenu.

In the submenu, press or to make a selection. When an item is selected,

20

Using Your Projector