Dell M209X manual Using Your Projector

3To cancel the password function, select OFF and enter the password to disable the function.

CHANGE PASSWORD—Allows you to change the password. Key in the original password and then enter the new password. Enter the new password again to confirm.

TEST PATTERN—Select 1 or 2 to activate the built-in Test Pattern to test the focus and resolution. Select Off to disable the function.

1To run the diagnostics test pattern 1, press and hold the Menu button and button on the projectors control panel simultaneously for two seconds.

2To run the diagnostics test pattern 2, press and hold the Menu button and button on the projectors control panel simultaneously for two seconds.

NOTE: To enable test pattern 2, it is required to connect an input signal to projector.

FACTORY RESET —Select On to reset the projector to its factory default settings.

Using Your Projector

29