Operating Instructions
DEL ET ING A SC AN N ER ’S DM X CH AN N EL SET T INGS
Action
1)Press the Program button until the LED blinks.
2)Hold the MODE button and press FINE. The Reverse LED will light.
3)Tap the Scanner button delete settings.
4)Press the MODE and AUTO/Del buttons at the same time. All LEDs will flash three times to confirm operation.
Notes
Assign mode will also work in this case.
CL E AR AL L SC AN N E R ’S DM X CH AN N EL S
Action
1)Turn the power off.
2)Press and hold the MODE and AUTO/Del buttons at the same time.
3)Turn the power back on. All LEDs will flash briefly to confirm operation.
Notes
Assign mode will also work in this case.
DI SPL AY P AN /T ILT D M X CH AN N EL S
Action
1)Press the FINE and MODE buttons at the same time putting the controller into Assign mode.
Press the FINE and MODE buttons once more to change to Reverse mode.
2)Press the Scanner button that you wish to display Pan and Tilt DMX values for.
Notes
F AD E T IM E SET T ING S
Action
1)With power on the unit off, press the MODE and TAP/Display buttons at the same time.
2)Apply power to the unit while holding the buttons pressed above.
3)Once unit is on, tap the TAP/Display button to change between Fade Time and Assign Fade Time.
Press the MODE and TAP/Display buttons at the same time to store your setting into memory.
4)You can also exit without saving by pressing the Blackout button.
Notes
ALL CH
FD TIME
or
ONLY X/Y
FD TIME
10 |