Operating Instructions
CO PY SC AN N ER SET T INGS
This operation allows the user to copy the programming state of one scanner to another. This is
especially useful when both scanners are of the same type.
Action
1)Hold and maintain the Scanner button to copy.
2)Tap another Scanner button to copy settings into.
Notes
CO PY SC EN E
Action
1)Press the Program button until the LED blinks.
2)Use BANK and BANK buttons to change banks.
3)Tap the scene to copy within the bank.
4)Use BANK and BANK buttons to change to another bank if desired.
5)Tap MIDI/Rec button.
6)Tap the SCENES button you wish to copy the scene to.
Notes
DEL ET E SC EN E
Action
1)Press the Program button until the LED blinks.
2)Use BANK and BANK buttons to change banks.
3)Tap the scene to delete.
4)Press and hold the Auto/Del button and tap the scene button you wish to delete.
Notes
All DMX channels for the deleted scene will be set to 0.
DEL ET E AL L SC EN ES
Action
1)Power off the controller.
2)Press and hold the Program and BANK buttons while turning the power back on.
Notes
CO PY B AN K
Action
1)Press the Program button until the LED blinks.
2)Use BANK and BANK buttons to select the bank to copy.
Notes
12 |