About Your New Labelmaker
With your DYMO ExecuLabel™ LP150 labelmaker, you can create a wide variety of
Visit www.dymo.com for information on obtaining labels and accessories for your labelmaker.
Warranty Registration
Please complete the warranty registration card and return it to the appropriate Customer Support address within seven days. Visit www.dymo.com/ registration for details or to register online.
Getting Started
Follow the instructions in this section to print your first label.
Connecting the Power
The labelmaker is powered by six AAA alkaline batteries. To save power, the labelmaker will automatically turn off after two minutes of inactivity.
To insert the batteries
1.Remove the battery compartment cover. See Figure 2.
Figure 2
2. | Insert the batteries following the | US | AUS |
|
| ||
| polarity markings (+ and |
| NZ |
3. | Replace the battery compartment cover. |
| |
Remove the batteries if the labelmaker will not be used for a long period of time.
Inserting the Label Cassette
Your labelmaker comes with one label cassette. Visit www.dymo.com for information about purchasing additional label cassettes.
To insert the label cassette
1.Lift the label cassette cover to open the label compartment. See Figure 3.
Remove cardboard insert
Figure 3
The first time you use the labelmaker, remove the protective cardboard insert from between the print head and pinch roller. See Figure 3.
2.Make sure the label and ribbon are taut across the mouth of the cassette and that the label passes between the guideposts. If necessary, turn the spool clockwise to tighten the ribbon.
3.Insert the cassette with the label and ribbon positioned between the print head and pinch roller. See Figure 4.
3