Problem (continued) | Possible Solution (continued) |
TEMP light is blinking amber | A projector fan has failed and the projector |
| will automatically shut down. Try to clear the |
| projector mode by pressing and holding the |
| POWER button for 10 seconds. Please wait |
| for about 5 minutes and try to power up again. |
| If the problem persists, contact Dell™. |
The OSD does not appear on the screen
Try to press the Menu button on the panel for 15 seconds to unlock the OSD. Check the Menu Lock on page 48.
The remote control is not operating smoothly or works only within a limited range
The battery may be low. Check if the laser beam transmitted from the remote is too dim. If so, replace with 2 new AAA batteries.
Troubleshooting Your Projector
93