Troubleshooting: Dell 2300MP Projector
S-video, Component-i). Use this advanced feature for preliminary self-diagnostic on your projector when encountering a display problem for video.
After turning on the projector, press "+" and "-" buttons on the control panel simultaneously and release the buttons when screen goes blank.
Press "+" and "-" buttons again to exit the diagnostic mode.
While in Self-diagnostic mode, the screen will run a seven-color-cycle test as following: "Red--> Green--> Blue--> White--> Watchet Blue--> Dark Green--> Yellow." Ensure that the colors of the test pattern are correct. Contact Dell if the colors are not displayed correctly.
The remote control is not operating smoothly or operating in very limited range
The battery may be low. If so, replace with 2 new AA batteries.
file:///C/Venkat%20Shared/Projectors/2300MP/EN/trouble.htm[11/30/2012 2:18:58 PM]
