1 | LAMP warning light | • If the LAMP light is solid amber, replace the | ||
|
|
| lamp (see Changing the Lamp on page 41). If | |
|
|
| this problem persists, contact Dell (see | |
|
|
| Contacting Dell on page 47). | |
|
|
| • If the LAMP light is blinking amber, the | |
|
|
| projector automatically shuts down indicating a | |
|
|
| system failure. If this problem persists, contact | |
|
|
| Dell (see Contacting Dell on page 47). | |
|
|
| ||
2 | TEMP warning light | • A solid amber TEMP light indicates that the | ||
|
|
| projector, lamp, or lamp driver are overheated. | |
|
|
| The display automatically shuts down. Turn the | |
|
|
| display on again after the projector cools down. | |
|
|
| If the problem persists, contact Dell (see | |
|
|
| Contacting Dell on page 47). | |
|
|
| • A blinking amber TEMP light indicates that a | |
|
|
| projector fan or color wheel have failed and the | |
|
|
| projector automatically shuts down. If the | |
|
|
| problem persists, contact Dell (see Contacting | |
|
|
| Dell on page 47). |
|
|
|
|
| |
3 | Power |
| Allows you to turn the projector on and off. For | |
|
|
| more information, see Turning Your Projector On | |
|
|
| on page 17 and Turning Your Projector Off on | |
|
|
| page 17. |
|
|
|
|
| |
4 | Up | / Keystone | Allows you to select options from the On Screen | |
| adjustment | Display (OSD) menu. You can also use the Up | ||
|
|
| button to adjust he image distortion caused | |
|
|
| by tilting the projector. |
|
|
|
|
| |
5 | Right | / Auto Adjust | Allows you to adjust the OSD setting. | |
|
|
| You can also use the Right | button to |
|
|
| synchronize the projector to the input source. | |
|
|
| Auto adjust does not operate if the OSD is | |
|
|
| displayed. |
|
|
|
| ||
6 | IR Receiver | Point the remote control towards the IR receiver | ||
|
|
| and press a button. |
|
|
|
|
|
|
22