∙ Press UP, DOWN, UP, DOWN, Enter | Chauvet f-95ww instruction

Operation

Dimmer - Menu

Control

Dimmer - Manual

Control

Dimmer Speeds

Dimmer Curves

Control Panel Lock

Passcode

Menu Access Lock

To adjust the light output of the OVATION™ F-95WW, select the dimmer setting as follows.

1.Go to the DIM main level.

2.Select the desired dimmer setting D.000–D.100(0–100% light output).

Manually adjust the light output by using the dimmer adjustment knob, as follows.

1.Press the dimmer adjustment knob above the display twice.

2.Select the desired dimmer setting D.000–D.100(0–100% light output) by turning the knob clockwise (value increases) or counter-clockwise (value decreases).

∙When using the dimmer adjustment knob, the lowest dimmer value stops at D.000 and the highest dimmer value stops at D.100.

∙During manual dimmer control, you can also use <UP> or <DOWN>, which will cycle through all the dimmer values.

∙After 30 seconds of dimmer adjustment knob inactivity, M. appears on the display.

Select the dimmer speed of the OVATION™ F-95WW by selecting the DIMX programming level.

1.Go to the SET main level.

2.Select the DIMX programming level.

3.Select a dimmer speed DIM1–DIM4(fast to slow) or OFF (linear output).

When selecting DIM1–DIM4, the output will correspond to the dimmer curve option selected under the dimmer curves programming level (CURV).

Select the dimmer curve of the OVATION™ F-95WW by selecting the CURV programming level. These options simulate the dimmer curve of an incandescent lighting product.

1.Go to the SET main level.

2.Select the CURV programming level.

3.Select a dimmer curve CV1–CV3(small to large) or OFF (linear output).

This setting enables you to activate or deactivate the control panel lock, which keeps non-authorized personnel from changing the product’s settings.

1.Go to the KEY main level.

2.Select either ON (activate) or OFF (deactivate).

When the control panel lock is activated, after 30 seconds of control panel inactivity or after turning on the product, the product will prompt you to enter the passcode.

After being prompted to enter the passcode:

∙Press <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>.

Note: Asterisks (*) appear on the display when entering the passcode.

This setting enables you to activate or deactivate the menu access lock. Activating the menu access lock prevents non-authorized personnel from making any changes to the programming levels under the SET main level.

1.Go to the SET main level.

2.Go to the SLCK programming level.

3.Select either ON (activate) or OFF (deactivate).

When the menu access lock is activated, in order to access the SET programming levels, the product will prompt you to enter the passcode. Enter the passcode as described in Passcode.

-12-	OVATION™ F-95WW User Manual Rev. 2