Delta Electronics Series H48SA Mechanical Drawing Without Heatspreader, Pin No Name Function

Page 12

MECHANICAL DRAWING (WITHOUT HEATSPREADER)

Pin No.	Name	Function
1	+Vin	Positive input voltage
2	ON/OFF	Remote ON/OFF
3	CASE	Case pin
4	-Vin	Negative input voltage
5	-Vout	Negative output voltage
6	-SENSE	Negative remote sense
7	TRIM	Output voltage trim
8	+SENSE	Positive remote sense
9	+Vout	Positive output voltage

Notes:

1

2

3

Pins 1-4, 6-8 are 1.00mm (0.040”) diameter

Pins 5 and 9 are 2.00mm (0.079”) diameter

All pins are copper with Tin plating.

12

DS_H48SA12025_05052008

Image 12

Contents Options Technical Specifications ParameterElectrical Characteristics Curves Typical input characteristics at room temperature Vin+ Output voltage noise and ripple measurement test setup Design Considerations Input Source ImpedanceFeatures Descriptions Features Descriptions CON Output Voltage Adjustment TrimThermal Testing Setup Thermal ConsiderationsThermal Derating Thermal Curves Mechanical Drawing Without Heatspreader Pin No Name FunctionMechanical Drawing with Heatspreader Part Numbering System Model List