Delta Electronics LCP-155A4HSRx SFP timing parameters for SFP management, Txdisable, Txfault

SFP timing parameters for SFP management

Parameter				Symbol	Min.	Max.	Unit			Unit Conditions
TX_DISABLE Assert								Time	from	rising edge	of TX_DISABLE to
				t_off		10	µsec	when the optical output falls below 10% of
time
								nominal
TX_DISABLE								Time	from	falling edge	of TX_DISABLE to
				t_on		1	msec	when	the	modulated	optical output rises
Negate time
								above 90% of nominal
Time	to	initialize,						From power on or negation of TX_Fault using
including		reset	of	t_init		300	msec
								TX Disable.
TX_FAULT
TX	Fault	Assert		t_fault		100	µsec	Time from fault to TX fault on.
Time
TX_DISABLE			to	t_rest	10		µsec	Time TX Disable must be held high to reset
reset								TX_Fault
LOS Assert Time				t_loss_on		100	µsec	Time from LOS state to Rx LOS assert
LOS Deassert Time				t_loss_off		100	µsec	Time from non-LOS state to Rx LOS deassert
Serial ID Clock Rate				f_serial_clock		100	kHz

8	Sep., 2006
	Rev. 0B
DELTA ELECTRONICS, INC.	www.deltaww.com