Delta Electronics LCP-10G3B4QDR manual Module Electrical Pin Definition

Page 5

LCP-10G3B4QDR

Module Electrical Pin Definition

Pin

Logic

Symbol

Name/Description

Note

1

 

VeeT

Module Transmitter Ground

1

2

LVTTL-O

TX_Fault

Module Transmitter Fault

2

3

LVTTL-I

TX_Disable

Transmitter Disable; Turns off transmitter laser output

3

4

LVTTL-I/O

SDA

2- write Serial Interface Data Line

 

5

LVTTL-I/O

SCL

2- write Serial Interface Clock

 

6

 

MOD_ABS

Module Absent, connected to VeeT or VeeR in the module

4

7

LVTTL-I

RS0

Not Implement

 

8

LVTTL-O

RX_LOS

Receiver Loss of Signal Indication

2

9

LVTTL-I

RS1

Not Implement

 

10

 

VeeR

Module Receiver Ground

1

11

 

VeeR

Module Receiver Ground

1

12

CML-O

RD-

Receiver Inverted Data Output

 

13

CML-O

RD+

Receiver Non-Inverter Data Output

 

14

 

VeeR

Module Receiver Ground

1

15

 

VccR

Module Receiver 3.3V Supply

 

16

 

VccT

Module Transmitter 3.3V Supply

 

17

 

VeeT

Module Transmitter Ground

1

18

CML-I

TD+

Transmitter Non-Inverted Data Input

 

19

CML-I

TD-

Transmitter Inverted Data Input

 

20

 

VeeT

Module Transmitter Griund

1

Note:

1.The module signal ground pins, VeeR and VeeT, shall be isolated from the module case.

2.This pin is an open collector/drain output pin and shall be pulled up with 4.7k-10k ohms to Host_Vcc on the host board. Pull ups can be connected to multiple power supplies, however the host board design shall ensure that no module pin has voltage exceeding module VccT/R + 0.5V.

3.This pin is an open collector/drain input pin and shall be pulled up with 4.7k-10k ohms to VccT in the Module.

4.This pin shall be pulled up with 4.7k-10k ohms to Host_Vcc on the host board.

5

Revision: 0B

 

2008/9/5

DELTA ELECTRONICS, INC.

www.deltaww.com

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Performance DescriptionApplications Recommended Operating Conditions Low Speed Electrical CharacteristicsAbsolute Maximum Ratings Optical Receive Characteristics TC=0 ºC to 70 ºC Optical Transmitter Characteristics TC = -5toParameter Symbol Min Typ Units Parameter Symbol Min Typ Max UnitsSFP+ Transceiver Electrical Pad Layout Module Electrical Pin Definition Pin Logic Symbol Name/DescriptionTXFault Low speed electrical control pins and 2-wire interfaceTXDisable ‧ Modabs ‧ RxlosRecommend Circuit Schematic Latch Color Identifier Package Outline Drawing for Metal Housing with Bail de-latchTiming parameters for SFP+ management Parameter Symbol Min Max UnitTBD RS1FCEnhanced Digital Diagnostic Interface Eeprom Serial ID Memory Contents 2-Wire Address A0h Address Name Value Dec Unit Bytes Digital Diagnostic Monitoring InterfaceState/ Control Bits Optional Set of Alarm and WarningRegulatory Compliance Feature Test Method Reference Performance

LCP-10G3B4QDR specifications

Delta Electronics has established itself as a leader in providing innovative power solutions, and one of their notable products is the LCP-10G3B4QDR, a high-performance rack-mounted Power Distribution Unit (PDU) that addresses the growing demands of data centers and IT infrastructure.

The LCP-10G3B4QDR is designed to offer efficient power management and distribution capabilities in a compact form factor. One of its standout features is the ability to support a wide range of input voltages, allowing it to be adaptable to various electrical environments and enhancing its compatibility with existing systems.

This PDU comes equipped with 10 outlets, ensuring ample power supply to critical equipment while also minimizing the footprint required for installation. The outlets are strategically placed to ensure easy access and efficient cable management, which is essential in densely packed data center environments.

A major characteristic of the LCP-10G3B4QDR is its integrated monitoring capabilities. The unit features real-time monitoring of power consumption and environmental conditions, including temperature and humidity. This functionality is crucial for data center managers, as it enables proactive management of power use and cooling requirements, leading to improved operational efficiencies and reduced energy costs.

The device supports advanced communication protocols, including SNMP, HTTP, and HTTPS, allowing seamless integration with existing network management systems. This connectivity is important for remote monitoring and management, enabling administrators to keep track of their power distribution from virtually anywhere.

Furthermore, Delta has incorporated cutting-edge safety features into the LCP-10G3B4QDR. The device complies with international safety standards, ensuring it meets rigorous testing requirements for reliable operation. Additionally, built-in surge protection safeguards sensitive equipment from power spikes, thereby enhancing overall reliability.

In terms of design, the LCP-10G3B4QDR features a space-saving, rack-mountable format that simplifies installation in standard 19-inch server racks. Its durable construction and cooling designs ensure that it can withstand the demanding conditions of a data center environment.

In conclusion, the Delta Electronics LCP-10G3B4QDR stands out with its robust feature set, focusing on flexibility, efficiency, and safety. As data centers continue to evolve, products like the LCP-10G3B4QDR become essential for ensuring that critical operations run smoothly and efficiently.
Top Page Image Contents