Proxim CPN 65756B manual Copyright

Page 2

Tsunami MP.11a Antenna Installation Guide

COPYRIGHT

©2003 Proxim Corporation, Sunnyvale, CA. All rights reserved. Covered by one or more of the following U.S. patents: 5,231,634; 5,875,179; 6,006,090; 5,809,060; 6,075,812; 5,077,753. This manual and the software described herein are copyrighted with all rights reserved. No part of this publications may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of Proxim Corporation.

TRADEMARKS

Tsunami, Proxim, and the Proxim logo are trademarks of Proxim Corporation. All other trademarks mentioned herein are the property of their respective owners.

REGULATORY INFORMATION

The Tsunami outdoor antenna solution must be installed and used in strict accordance with the instructions as described

in this Antenna Installation Guide.

Note: Radio approvals for the Tsunami outdoor antenna solution are valid only when using the exact combination of outdoor antenna cabling components and antennas as listed in this Tsunami MP.11a Antenna Installation Guide.

Using other combinations of parts and components in outdoor antenna solutions will void the radio type approval and may be in violation of local radio regulations.

Proxim Corporation and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from failing to comply with these guidelines.

This document provides regulatory information for the following wireless products:

Tsunami MP.11a Base Station Unit, Subscriber Unit, Residential Subscriber Unit

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference

(2)This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by Proxim Corporation could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to attempt to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help.

This product must be fixed/mounted on permanent structures with a separation distance of at least two meters from all persons during normal operation.

Notices

2

CPN 65756B

Issue Date: August 2003

Image 2
Contents Tsunami MP.11a Copyright Contents Appendix D. Certified Outdoor Solutions Finding Additional Information About This BookWHO should USE this Guide Additional Files on Your Software CD-ROM About the Tsunami MP.11APoint-to-Point Link Other Sources of InformationPoint-to-Multipoint Network Point-to-Multipoint NetworkSite Prerequisites Preparing for InstallationOverview of the Indoor Installation Tsunami MP.11a HardwarePlacement of the Tsunami MP.11a Hardware Placement of the Surge Arrestor Cable SystemAntenna Cable Route Overview of the Outdoor Installation Antenna PlacementPotential Obstacles for a Directional Antenna Preparing for Installation CPN 65756B Issue Date August Wall Side Mount Antenna MountingTripod Mount Range = Maximum Range x Cable Factor x Clearance Factor Determining Range and ClearanceDetermining the Outdoor Range Cable Factor Maximum RangeCable Factor Clearance Factor Fresnel ZoneDetermining Range and Clearance CPN 65756B Issue Date August Clearance Factor Diagram CalculationsCalculating Received Signal Level and Link Budget RSL dBm = Pout L1+ G1 + G2 L2 LpProcedure Output Power Table for FCC Receiver Sensitivity and Minimum SNR for a Good LinkOutput Power Table for Etsi EirpDistance and Link Budget Safety Precautions Installing the AntennaPlanning Antenna Installation Installation Overview Connecting the Antenna Cable Mounting the AntennaSealing the Cable Connectors Grounding SystemAntenna Alignment Antenna PolarizationAntenna Cable Routing Before Climbing the RoofAppendix A. Outdoor Antenna Equipment Antenna List Antenna ListAppendix B. Antenna Cabling System Selecting the Correct Connector TypeStandard N-Type Connector Diagram Outdoor Cabling ComponentsReverse Polarity-N Cabling Diagram Cabling Component Reverse Polarity-N Cabling SystemsSurge Arrestor Surge ArrestorSpecifications Surge Arrestor LOW-LOSS Antenna CableSpecifications 6 m 20 ft Antenna Cable Specifications 15 m 50 ft Antenna CableSpecifications 22 m 75 ft Antenna Cable Specifications 15 m 50 ft Extra Low Loss Antenna CableElectrical Appendix C. Recommended Antennas875 GHZ Dimensions Pattern Tsunami MP.11a Antenna Installation Guide Tsunami MP.11a Antenna Installation Guide Mounting Instructions DBI High Gain Directional Panel Antenna for 5 GHZGeneral Description Specifications VswrMounting Package ContentsDBI High Gain Directional Panel Antenna for 5.8 GHZ Electrical Pattern Tsunami MP.11a Antenna Installation Guide Selecting the Correct Cables Appendix D. Certified Outdoor SolutionsIntroduction Appendix E. Channel Frequencies Channel ID FCC/World GHz Etsi GHz France GHz Japan GHzSupport and Warranty Technical SupportWarranty and Repair Reported Problem Problem Description To be Filled OUT by User

CPN 65756B specifications

Proxim CPN 65756B is a versatile and cutting-edge wireless connectivity solution designed to meet the increasing demands for robust and high-performance communication in various industries. This access point is engineered to provide reliable connectivity, high throughput, and enhanced network security, making it suitable for various applications including enterprise environments, public venues, and industrial settings.

One of the standout features of the Proxim CPN 65756B is its dual-band capability. It operates on both the 2.4 GHz and 5 GHz frequency bands, allowing for flexible deployment based on specific network requirements. This dual-band functionality enables users to take advantage of faster data rates and reduced interference on the 5 GHz band while still accommodating legacy devices that operate on the 2.4 GHz band.

The CPN 65756B supports advanced Wi-Fi standards, including IEEE 802.11ac, which significantly boosts wireless network performance with high-speed data transfers. This access point can deliver up to 1.75 Gbps of aggregate throughput, ensuring that users experience minimal lag and quick response times for bandwidth-intensive applications such as video conferencing and high-definition streaming.

Equipped with a range of technologies, the Proxim CPN 65756B provides seamless connectivity to large numbers of users. Its Multi-User MIMO (MU-MIMO) capability allows multiple devices to be served simultaneously, enhancing overall network efficiency and optimizing user experiences. This feature is particularly beneficial in environments with high user density, reducing congestion and ensuring that all users maintain reliable connections.

Security is a top priority for deployments with the CPN 65756B. It supports WPA3 and advanced encryption protocols to protect sensitive data being transmitted over the network. Additionally, it includes built-in features for guest access and robust authentication methods, further enhancing its security profile.

The Proxim CPN 65756B also emphasizes ease of management and deployment. It is compatible with Proxim's cloud-based management platforms, allowing administrators to monitor network performance, troubleshoot issues, and configure settings remotely. This simplifies maintenance and increases operational efficiency, particularly for large-scale installations.

In summary, the Proxim CPN 65756B represents a powerful solution for organizations seeking to improve their wireless communications infrastructure. With its advanced features, dual-band operation, high throughput, and strong security measures, it stands out as a reliable choice for enhancing connectivity in a myriad of environments.