Operating Procedures, Recording Tape | Pyramid Car Audio PR530A

OPERATING PROCEDURES

Before starting operation

Check that the controls have been set to the following positions before commencing operation

Rotate the VOLUME control counterclockwise as far as it will go and set it at the “0” minimum volume position. Set the BALANCE control to its center position.

Set the BASS and TREBLE tone controls to the “0” (center) position.

After these checks, press the POWER switch to turn on the power.

If you find a remote standby indicator is lighted, the power amplifier is in remote standby mode.

(a)Press the power switch off and press it once again after the remote standby indicator is off.

(b)Using the remote control to switch on the power.

After switching on, the indicator will be shinning on “Phono” for a second, after that the unit is set to “Tuner”.

Playing a program source

1.Press the desired input selector switch to select the program source to which you wish to listen. To listen to record: press the PHONO switch.

To listen to radio broadcast: Press the TUNER switch.

To listen to a compact disc: Press the CD switch.

To listen to a component connected to VIDEO terminals: Press the VIDEO switch.

To listen to a component connected to AUX terminals: Press the AUX switch.

To listen to a tape: Press the TAPE switch. 2.Operate the program source unit.

3.Gradually turn the VOLUME control clockwise until the desired volume level is obtained. 4.Attain a balance between the sound of the left and right channels using the BALANCE control. 5.To adjust the tone quality, adjust the BASS and TREBLE control.

RECORDING TAPE

A record, compact disc, broadcast of the program source of a component connected to the line terminals can be recorded by the tape deck connected to the TAPE recording (REC) terminals.

1.Select the input selector switch corresponds to the program source (Phono, CD, Tuner, Video/Aux) which is to be recorded.

2.Start playing the program source.

3.Operate the tape deck and press the “REC” key.

*The volume, Balance, Tone and other controls (including graphic equalizer) have no effect on the recording level or sound quality of the signals being recorded even they are operated.

MICROPHONE MIXING (KARAOKE)

-Connect the microphone to MIC jack.

-Adjust your desired singing voice level with Karaoke by turning the MIC LEVEL switch.

**Note**

-If strange noises (squealing or howling) are emitted during mixing, change the direction of the microphone or turn down the volume.

-It is possible to record a singing voice accompanying the CD, Tuner, Cassette Tape or Video.

-If using microphone or with Karaoke, it is better to switch off the sound effect switches and adjust the treble/bass volume to zero.

-If using remote to switch off the power Amplifier, the Remote Standby Indicator will be grown on. At this state the amplifier is in sleep mode only, the transformer and parts of circuit is in operation with low energy.

Switch off the Power Amplifier by pressing the main power switch in case of long absence.

PR530A specifications

The Pyramid Car Audio PR530A is an entry-level amplifier designed to enhance your car audio experience. Known for its remarkable performance and affordability, this amplifier caters to both casual listeners and audio enthusiasts looking to upgrade their in-car sound system without breaking the bank.

One of the standout features of the PR530A is its power output. The amplifier boasts a peak power of 1500 watts, enabling it to deliver strong and clear audio even at high volumes. The RMS power rating hovers around 300 watts, providing ample power to drive most speakers effectively. This substantial power output allows users to achieve rich bass response and crisp highs, resulting in an engaging sound that can transform any car ride.

The PR530A utilizes a robust, efficient design that includes a MOSFET power supply. This technology not only enhances performance but also improves reliability, ensuring that the amplifier can handle long listening sessions without overheating. Additionally, the built-in overcurrent protection safeguards the unit from potential damage, granting peace of mind to users.

Another key characteristic of the Pyramid Car Audio PR530A is its versatility in terms of connectivity. The amplifier features two RCA inputs, making it compatible with a range of head units and allowing easy integration into existing audio systems. Furthermore, the inclusion of a variable low-pass crossover allows users to fine-tune their audio experience by adjusting the frequency range that is sent to the amplifier. This feature is particularly beneficial for bass optimization, ensuring that users can achieve a well-balanced sound profile.

Moreover, the PR530A includes adjustable gain controls, enabling users to set the input levels according to their preferences. This feature is especially useful for matching the amplifier's output with different head units or speaker sensitivities. Additionally, the amplifier incorporates bright LED indicators for power and protect status, providing immediate feedback on its operation.

In terms of aesthetics, the Pyramid PR530A maintains a sleek design, compact enough to fit in most spaces while still allowing for effective cooling. Its durable construction indicates reliability and long-term use, making it an excellent addition to any car audio system.

Overall, the Pyramid Car Audio PR530A is a compelling choice for anyone looking to enhance their in-car audio setup. With its impressive power output, versatile features, and user-friendly design, it delivers a great combination of performance and value, catering to a wide range of audiophiles and casual listeners alike.