Delta Electronics Series S48SP manual Mechanical Drawing, Name Function

Page 13

MECHANICAL DRAWING

Surface-mount module

Through-Hole module

Pin No.	Name	Function
1	+Vin	Positive input voltage
2	-Vin	Negative input voltage
3	ON/OFF (Optional)	Remote ON/OFF (Optional)
4	-Vout	Negative output voltage
5	TRIM (Optional)	Output voltage trim (Optional)
6	+Vout	Positive output voltage

DS_S48SP3R310_05222008

13

Image 13

Contents Features Parameter Technical SpecificationsTypical full load input characteristics at room temperature Electrical Characteristics CurvesFor Negative Remote On/Off Logic Electrical Characteristics Curves Input reflected ripple current, is, through a 12µH Input Source Impedance Design ConsiderationsOver-Temperature Protection Features DescriptionsOver-Current Protection Remote On/OffOutput Voltage Adjustment Features Descriptions CONThermal Considerations Thermal Testing SetupThermal Curves Thermal DeratingRecommended PAD Layout SMD Pick and Place LocationLead Free SAC Process Recommend TEMP. Profile Leaded Sn/Pb Process Recommend TEMP. ProfileName Function Mechanical DrawingModel List Part Numbering System