Compaq 1124 manual 2Installing the Repeater, Attaching the Mounting Brackets

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-2Installing the Repeater

1.Remove the two screws from the left and right side of the repeater. (These screws are extras and are not needed to install the mounting brackets.)

2.Position the bracket as shown in Figure 3-1, and secure it with the smaller bracket screws. Then attach the remaining bracket to the other side of the repeater.

Bracket Screws

21 22 23 24

9 10 11 12

MDI MDI-X

Figure 3-1. Attaching the Mounting Brackets

3.After you attach both mounting brackets, position the bracket slots over the desired holes on the rack (Figure 3-2). Then insert and tighten the supplied rack-mount screws.

PWR A

PWR B

COL

13	14	15	16	17	18	19	20	21	22	23	24
						MDI-X
1	2	3	4							11	12
				5	6	7	8	9	10

MDI MDI-X

MDI-X

Rack-mount Screws

Figure 3-2.Positioning the Repeater in a Rack