Compaq MSB900L user manual Applicable Documents and Standards

Page 8

DIGITAL-LOGIC AG

MSB900/L Detailed Technical Manual V1.0

1.9.Applicable Documents and Standards

The following publications are used in conjunction with this manual. When any of the referenced specifica- tions are superseded by an approved revision, that revision shall apply. All documents may be obtained from their respective organizations.

￿Advanced Configuration and Power Interface Specification Revision 2.0c, August 25, 2003 Copyright © 1996-2003 Compaq Computer Corporation, Intel Corporation, Microsoft Corporation, Phoenix Tech- nologies Ltd., Toshiba Corporation. All rights reserved. http://www.acpi.info/

￿ANSI/TIA/EIA-644-A-2001: Electrical Characteristics of Low Voltage Differential Signaling (LVDS) In- terface Circuits, January 1, 2001. http://www.ansi.org/

￿ANSI INCITS 361-2002: AT Attachment with Packet Interface - 6 (ATA/ATAPI-6), November 1, 2002. http://www.ansi.org/

￿ANSI INCITS 376-2003: American National Standard for Information Technology – Serial Attached SCSI (SAS), October 30, 2003. http://www.ansi.org/

￿Audio Codec ’97 Revision 2.3 Revision 1.0, April 2002 Copyright © 2002 Intel Corporation. All rights reserved. http://www.intel.com/labs/media/audio/

￿Display Data Channel Command Interface (DDC/CI) Standard (formerly DDC2Bi) Version 1, August 14, 1998 Copyright © 1998 Video Electronics Standards Association. All rights reserved. http://www.vesa.org/summary/sumddcci.htm

￿ExpressCard Standard Release 1.0, December 2003 Copyright © 2003 PCMCIA. All rights reserved. http://www.expresscard.org/

￿IEEE 802.3-2002, IEEE Standard for Information technology, Telecommunications and information ex- change between systems–Local and metropolitan area networks–Specific requirements – Part 3: Car- rier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications. http://www.ieee.org

￿IEEE 802.3ae (Amendment to IEEE 802.3-2002), Part 3: Carrier Sense Multiple Access with Collision

Detection (CSMA/CD) Access Method and Physical Layer Specifications, Amendment: Media Access Control (MAC) Parameters, Physical Layers, and Management Parameters for 10 GB/s Operation. http://www.ieee.org

￿Intel Low Pin Count (LPC) Interface Specification Revision 1.1, August 2002 Copyright © 2002 Intel Corporation. All rights reserved. http://developer.intel.com/design/chipsets/industry/lpc.htm

￿PCI Express Base Specification Revision 1.1, March 28, 2005, Copyright © 2002-2005 PCI Special In- terest Group. All rights reserved. http://www.pcisig.com/

￿PCI Express Card Electromechanical Specification Revision 1.1, March 28, 2005, Copyright © 2002- 2005 PCI Special Interest Group. All rights reserved. http://www.pcisig.com/

￿PCI Local Bus Specification Revision 2.3, March 29, 2002 Copyright © 1992, 1993, 1995, 1998, 2002 PCI Special Interest Group. All rights reserved. http://www.pcisig.com/

￿PCI-104 Specification, Version V1.0, November 2003. All rights reserved. http://www.pc104.org

￿PICMG® Policies and Procedures for Specification Development, Revision 2.0, September 14, 2004, PCI Industrial Computer Manufacturers Group (PICMG®), 401 Edgewater Place, Suite 500, Wake- field, MA 01880, USA, Tel: 781.224.1100, Fax: 781.224.1239. http://www.picmg.org/

￿Serial ATA: High Speed Serialized AT Attachment Revision 1.0a January 7, 2003 Copyright © 2000- 2003, APT Technologies, Inc, Dell Computer Corporation, Intel Corporation, Maxtor Corporation, Sea- gate Technology LLC. All rights reserved. http://www.sata-io.org/

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents MSB900/L SBCAbout this Manual and How to Use It MSB900/L Detailed Technical ManualTable of Contents 10.1 Preface TrademarksDisclaimer Environmental Protection StatementTechnical Support Limited Two Year WarrantyRecycling Information Explanation of Symbols CE ConformityApplicable Documents and Standards For Your Safety RoHS CommitmentWeee Application RoHS Compatible Product DesignRoHS Compliant Production Process Swiss Quality Swiss Association for Quality and Management Sys- temsStandard Features of the MSB900/L Unique FeaturesOverview DMAMSB900 Block Diagram MSB900/MSB900L specifications Mass Storage Specification Standard AT Interfaces Specification NamePeripheral Extension Specification Power Supply SpecificationExamples of Ordering Codes Related Application NotesDimensions & Diagrams MSB900/LDIGITAL-LOGIC AG DIGITAL-LOGIC AG DIGITAL-LOGIC AG Mm millimeter + / 0.1mm 25.10.2006 / BRR MSB800CON Part NrBoard / Version Unit Tolerance Date / Author MSB900/L Incompatibilities to a standard PC/AT High Frequency Radiation to meet EN55022Battery-Lifetime BUS SignalsExternal battery assembling for the MSB900L Addressing PCI DevicesThis Bios history is not for the following products Version Date Status ModificationsPower Requirements Boot TimeTest environment for power consumption measurement Detailed System DescriptionCPU, Boards and RAMs InterfacesControllers Serial Ports COM1-COM2Floppy Disk Interface Interrupt ControllersTimers and Counters Programmable TimersROM-BIOS Sockets RTC Real Time ClockBios Cmos Setup Cmos RAM MapDevice MapCmos Map Cmos Map Bit = Internal IDE Controller Disable Password Eeprom saved Cmos Setup Bits = Reserved 34h Minor CPU RevisionSystem Memory Map Eeprom Memory for SetupMemory & I/O Map System I/O map Addr Function Size CommentIf KEL Memory Offset 100h0 = MSB900/L Detailed Technical Manual Map LPCMSR bit enables/disables into I/O Graphic Modes Resolution Col. Dept FrequencyVGA/LCD Controller of the Geode LX900 Description of the Connectors Connector Structure Pin RemarksVideo Input Flat cableTop view of the MSB900/L Bottom view of the MSB900/L X14 Power Supply Pin Signal Shield Power supplyPin Signal X15 Operator Panel / Flat Panel bottom side GND LVDSYAP0 LVDSYAM0 GND LVDSYAP1 LVDSYAM1GND LVDSYAP2 LVDSYAM2 GND Lvdsclkam LvdsclkapX31 Keyboard PS/2 and Mouse Utility Connector Connector and Adapter Mini- DIN PS/2 6 PC RemarksX33 10/100 BASE-T Interface Connector Pin Signal CAT X34 10/100 BASE-T Interface Connector Pin SignalX51 USB 2 Connector Dual USB Pin Signal Remarks X39 Serial Port COM2 Header onboard SUB connector SignalX50 USB 1 Connector Dual-USB Pin Signal Remarks X60 IDE Interface Pin Signal X52 USB Udoc not assembledPin Power supply GND X101 PCI-104 BUS Interface Pin Dlag boards have them as NC not connected X110 LPC-PortTCK TMS TDI TDO X230 JTAG-Port Pin SignalX301 VGA Monitor CRT-Signals 15pins High-Density DSub Pin Reload Default Bios Settings DisabledJumper Locations on the Board Jumpers on MSB900/LDIGITAL-LOGIC AG Cable Interfaces Hard Disk Cable 44pinCOM1/LPT Serial Interface Cable Pin Signal COM1 9pin D-Sub malePin Signal LPT1 25pin D-Sub female Pin Signal COM2 9pin D-Sub male COM2 Serial Interface CableMHz Uin Thermal SpecificationsThermal Analysis for Case Integration Assembly Views MSB900/LDIGITAL-LOGIC AG Mechanical Dimensions Separate standard Dhcp and redirection services PXE-BOOT and PXE-SETUP in the BiosCombined standard Dhcp and redirection services DIGITAL-LOGIC AG PXE-LICENSE Order Product Currency Circle oneMPC20 USD CHFBios Cmos CmosDram EMI / EMCUdoc USB VGA ROM-BIOS RTCSQS

MSB900, MSB900L specifications

The Compaq MSB900 and MSB900L are noteworthy entries in the realm of personal computing, particularly for their cutting-edge features and innovative technologies that defined their era. Positioned as versatile desktop solutions, both models have garnered attention for their robust performance and user-friendly design.

The Compaq MSB900 is equipped with a powerful processor that enhances multitasking efficiency. Its architecture supports a range of demanding applications, making it suitable for both professional and everyday use. Users can expect a seamless experience whether working on complex spreadsheets or engaging in casual gaming.

In terms of memory, the MSB900 boasts expandable RAM options, allowing users to enhance their system's capabilities as needed. The availability of multiple RAM slots provides flexibility for upgrades, ensuring the system can keep pace with future software requirements. Storage solutions in the MSB900 include high-speed hard drives, which contribute to fast boot times and robust data retrieval.

The MSB900L variant steps up the performance with additional features tailored for power users. It incorporates advanced graphics capabilities, offering superior visual experiences for gaming and multimedia applications. The dedicated graphics card provides a substantial boost in rendering performance, making it a worthy choice for graphic designers and video editors.

One of the standout characteristics of the MSB900 and MSB900L is their commitment to connectivity. Both models come equipped with a wide array of ports, ensuring compatibility with various peripherals. This includes USB ports for modern devices, Ethernet ports for wired networking, and legacy connections for older technology, catering to a diverse user base.

Energy efficiency is another key feature of these models. Designed with power-saving technologies, the Compaq MSB900 and MSB900L aim to reduce energy consumption without compromising performance. This focus not only helps to lower operating costs but also aligns with growing consumer preferences for environmentally conscious products.

In summary, the Compaq MSB900 and MSB900L offer a compelling combination of performance, expandability, and connectivity. Their innovative features and user-friendly design make them suitable for a wide range of users, from casual consumers to professional power users. As a testament to Compaq’s legacy, these models continue to be regarded as reliable choices in the personal computing landscape.
Top Page Image Contents