Compaq 8030 manual Setting Up the Monitor

Setting Up the Monitor

To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow these steps:

This monitor has multiple connectors on the back panel that can be used to connect two computers simultaneously to the monitor. Be sure the Video Channel Select button on the front of the monitor is set to the correct position to receive signals from the connected computer. See the Front Panel Controls table for more information.

1.Place the monitor in a convenient, well-ventilated location near your computer.

2.Connect the signal and AC power cables to the monitor 1. Refer to the next section, “Connecting the Signal Cables,” for additional information.

3.Connect the monitor signal cable 2 to the appropriate video connector on the rear panel of the computer.

4.Connect the AC end of the power cable 3 to AC receptacle on the monitor.

5.Connect the power cable 4 to an electrical wall outlet.

TFT8030 User’s Guide 3