Compaq 5030 manual Removing the Monitor Base

Page 11

Product Features

The DVI-D connector on this monitor uses digital video information to provide higher speed for higher display resolution. The results are more precise video displays without manually adjusting screen display quality.

Signal Cables Included:

VGA (Analog) to VGA Connector (15 pin)

DVI-D Cable (Digital only) to DVI Digital Connector

Removing the Monitor Base

Before you can mount the monitor onto a swing arm or other mounting fixture, you must remove the monitor from the base.

CAUTION: Before beginning to disassemble the monitor, be sure the monitor is turned off and the power and signal cables are both disconnected.

To remove the monitor from the base, complete the following steps:

1.Lay the front bezel down on a soft area to prevent it from getting scratched, defaced, or broken.

Compaq TFT5030 Flat Panel Monitor User’s Guide

9

Image 11
Contents User’s Guide Page Product Features Universal Driver Manager Information Files Setting Up the Monitor Connecting the Monitor Cables Product Features Connecting the Video Signal Cable Connecting the Video Cable to the Monitor and Computer Removing the Monitor Base Remove the monitor base 2 from the monitor Operating the Monitor Front Panel Controls Advanced Menu On-Screen Display SettingsMain Menu Main Menu How to Adjust Settings Special OSD Messages Sleep Timer Mode Adjusting Screen Quality Optimizing Digital Conversion Display ResolutionsUser Modes Display ResolutionsProtecting the Monitor Care and MaintenanceEnergy Saver Feature Product Features Shipping the Monitor Cleaning the MonitorModifications Federal Communications Commission NoticeCanadian Notice CablesJapanese Notice Avis CanadienEuropean Notice EPA Energy Star Compliance Power Cord Set Requirements