Compaq 5030 manual Setting Up the Monitor

Product Features

Setting Up the Monitor

To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow these steps:

1.Place the monitor in a convenient, well-ventilated location near your computer.

2.Connect the signal and power cables to the monitor 1.

3.Connect the DC connector of the AC adapter to the DC power cable that extends from the monitor base.

4.Connect the AC cable 3 to the AC receptacle on the AC adapter.

5.Connect the monitor signal cable 2 to the appropriate video connector on the rear panel of the computer.

6.Connect the power cable 4 to an electrical wall outlet.

4 Compaq TFT5030 Flat Panel Monitor User’s Guide