Panasonic SA-XR50 3.0 m, Setup, Front, Filter, Advanced setup, Small, Speakers, Distance

Advanced setup

You can adjust the settings to match the setup environment and performance of the connected speakers.

^

8

SPEAKERS

AB

6.1CH DECODING

VCR 2

VIDEO IN L AUDIO IN R

MULTI CONTROL INPUT SELECTOR

MULTI CONTROL	INPUT SELECTOR	VOLUME
		DOWN	UP	PUSH ENTER

PHONES

Multi control advanced setup settings MULTI CONTROL

Operations

RQT7492

22

Enter Multi

1 control mode

MULTI CONTROL

PUSH ENTER

Main menu is displayed.

(Multi control mode menus and factory settings á back cover)

2 Select“SETUP 2 (ADVANCE SETUP)”.

INPUT SELECTOR INPUT SELECTOR

Switching Entering

SETUP 2

3 Change the settings.

• To cancel

MULTI CONTROL

PUSH ENTER

To finish settings

1.Press [MULTI CONTROL] several times to select “EXIT”.

2.Press [INPUT SELECTOR].

SPEAKERS

Set the size to suit your speakers.
LARGE:
For speakers that can reproduce a full
sound range, particularly the bass range
below 100 Hz.
SMALL:
For speakers that cannot adequately	1. Select.		2. Select the		3. Change the
reproduce the bass range. This setting is			speaker.		setting.
sufficient for most speakers if you are
using a subwoofer.	INPUT SELECTOR	INPUT SELECTOR	INPUT SELECTOR	INPUT SELECTOR	INPUT SELECTOR	INPUT SELECTOR
NONE:
For speakers you haven’t connected
(center or surround).	SPEAKERS		FRONT		SMALL
For the surround back (SUR BACK) and
subwoofer (SUB-WFR), select YES if you
have connected one, or NO if you have not.			FRONT, CENTER,		NONE, SMALL, LARGE
			SURROUND,			NO, YES
			SUR BACK, SUB-WFR

DISTANCE
Enter the distance of the front, center and
surround speakers from the seating
position.					the 1. Select.			2. Select the		3. Change the
By	setting	the	distance	between
speaker’s position (except the subwoofer)								speaker.		setting.
and	the listeners		seating	position,	the	INPUT SELECTOR	INPUT SELECTOR	INPUT SELECTOR	INPUT SELECTOR	INPUT SELECTOR	INPUT SELECTOR
sound delay time is automatically adjusted
so that sound reaches the listener at the
same time. You can select distances						DISTANCE		FRONT		3.0 m
intervals.
between 1.0		and	10.0 m	at 0.1-meter
								FRONT, CENTER,		1.0 m	10.0 m
								SURROUND,
								SUR BACK
FILTER						1. Select.		2. Change the
Change the cut-off for bass output from the								setting.
front speakers.						INPUT SELECTOR	INPUT SELECTOR	INPUT SELECTOR	INPUT SELECTOR
If you set the front speakers to “SMALL”, the
filter is set to 100 Hz. Raise the cut-off if the
bass from the front speakers is
unsatisfactory so that this bass is output						FILTER			100
through the subwoofer.
You can raise the cut-off from 100 Hz to									100, 150, 200
either 150 Hz or 200 Hz.