Center Width Control - C-WDTH, Dimension Control - DIMEN

You can adjust the effect of MUSIC and PANORAMA with the center width and dimension controls.

Center Width Control – C-WDTH	Dimension Control – DIMEN
This adjustment helps you realize a more natural sound image when	You can make up for differences in the output level of the front and surround
listening to music. Move sound out into the front speakers to improve the	speakers. You can choose a level between –3 and +3 - Increase the level to
overall front image, or add sound to the center speaker to fix the center	move sound to the front speakers, decrease to move it to the surround
image.	speakers. The default is level 0.

You can choose a level between 0 (the center speaker is dominant) and 7 (center sound is spread out). The default level is 3.

You can adjust the effect of MUSIC with the center image control.

Center Image Control – C-IMG

This adjustment helps you realize a more natural sound image when	You can choose a level between 0 (the center speaker is dominant) and
listening to music. Move sound out into the front speakers to improve the	5 (center sound is spread out).
overall front image, or add sound to the center speaker to fix the center	The default level is 3.
image.	EFFECT	–	+
		w	q
	Select “C-IMG”.	Adjust the effect.

You can adjust the sound field by adjusting the level of the speakers and effect. These adjustments can be made for each SFC mode.

LEVEL

Select speaker channel.

C RS LS SW

When 6.1CH DECODING is on:

C RS SB LS SW

–+

w q

Adjust the level.

C, RS, SB and LS: –10 dB to +10 dB

SW: – – – (off) MIN

1 – 19 MAX

EFFECT

–

w q

Adjust the effect.

SFC effect can be adjusted between EFFECT 1 (minimum) and EFFECT 10 (maximum).

The factory setting is EFFECT 5 for each mode.

Step 4

•Output is only from the speakers selected in the SPEAKERS settings.

Listening to multi-channel sources in stereo (2CH MIX mode)

When multi-channel sources are played in this mode, the sounds intended for the other speaker channels are played through the front speakers.

Dolby Pro Logic Ⅱ , DTS NEO:6 and SFC modes remain in effect	When input is PCM with sampling frequencies of 192, 176.4
until you change them.	(COAXIAL1), 96, or 88.2 kHz:
• To cancel	• You cannot add surround effects with Dolby Pro Logic Ⅱ , DTS
Press [STEREO/2CH MIX, OFF].	NEO:6 or SFC.
The 2CH MIX mode remains in effect until you change input mode	When neither the center or surround speakers are selected in the
or turn off the unit.	SPEAKERS settings:
• To return to surround sound	• You cannot use Dolby Pro Logic Ⅱ , DTS NEO:6 or SFC.
Press [STEREO/2CH MIX, OFF].	When the surround back speaker is not selected in the SPEAKERS
	settings:
	• You cannot use 6.1CH DECODING mode.
	If the unit does not automatically recognize Dolby Digital Surround
	EX or DTS-ES and output is 5.1 channels:
	• Press [6.1CH DECODING] to switch the mode on manually. Sound
	will now come from the surround back speaker.

RQT7492