Step 3 Settings
Multi control basic setup settings MULTI CONTROL
Change the settings to suit your equipment to the environment in which you are using it. Before making any changes, read the descriptions of the settings, note the factory settings and ranges, and refer to the equipment’s instructions.
^
8
Turn on.
^
8
SPEAKERS
AB
6.1CH DECODING
VCR 2
VIDEO IN | L AUDIO IN R |
Display
MULTI CONTROL | INPUT SELECTOR | VOLUME |
|
PUSH ENTER |
|
|
|
|
| DOWN | UP |
PHONES
MULTI CONTROL | INPUT SELECTOR |
PUSH ENTER
1 | Enter Multi control |
mode. |
MULTI CONTROL
PUSH ENTER
Main menu is displayed.
(Multi control mode menus and factory settings á back cover)
| 2 | Select “SETUP 1 | |
3 |
| (BASIC SETUP)”. | |
Step |
| INPUT SELECTOR | INPUT SELECTOR |
|
|
|
|
Switching Entering
SETUP 1
3 Change the settings.
• To cancel
MULTI CONTROL
SPEAKERS
Set the speaker combination connected to this unit. SUBW: Subwoofer
L R: Front L/R
C:Center
S:Surround
SB: Surround Back
For the subwoofer (SUBW), select YES if you have connected one, or NO if you have not.
LCR S SB: All speakers connected
L_R S SB: No center speaker
LCR S __: No surround back speaker
L_R S __: No center and surround back speaker
LCR _ __: No surround speaker
L_R _ __: Only front speaker
D-INPUT
(Digital input)
Change these settings to suit the connections you have made to the optical (OPT) and coaxial (COAX) digital input terminals, so that the correct source is selected when you turn [INPUT SELECTOR].
IN MODE
(Input mode)
This unit automatically detects whether input is digital or analogue, but you can fix the input mode.
AUTO: Automatically detects the input signal and plays
ANALOG: Fixes the input signal to analogue and plays
DIGITAL: Fixes the input signal to digital and plays
PCM FIX: Fixes the input signal to PCM and plays
1. Select.
INPUT SELECTOR | INPUT SELECTOR |
SPEAKERS
1. Select.
INPUT SELECTOR | INPUT SELECTOR |
D- INPUT
1. Select.
INPUT SELECTOR | INPUT SELECTOR |
IN MODE
PUSH ENTER
RQT7492
10 |
To finish settings
1.Press [MULTI CONTROL] several times to select “EXIT”.
2.Press [INPUT SELECTOR].
EXIT
Note regarding PCM FIX mode
In rare cases, the unit may have trouble recognizing the digital signals on discs.
With the PCM signals on CDs, this may cause the beginning of a track to be cut off. Engage the PCM FIX mode if this occurs.
When PCM FIX mode is on, the unit cannot process other signals. This may cause noise to be output. Select another mode in this case.
The PCM FIX mode remains on even if you turn the unit to standby.
