Lexmark 436, 236, 036 manual Fax Settings menu, Fax Mode Analog Fax Setup menu, General Fax Settings

Understanding the printer menus 162

Fax Settings menu

Fax Mode (Analog Fax Setup) menu

Analog Fax Setup mode sends the fax job through a telephone line.

General Fax Settings

Use	To
Fax Name	Specify the name of the fax in the printer.
Fax Number	Specify the number assigned to the fax.
Fax ID	Specify how the fax is identified.
Fax Name	Note: Fax Number is the factory default setting.
Fax Number
Enable Manual Fax	Set the printer to fax manually, which requires a line splitter and a telephone handset.
On	Notes:
Off
	• Use a regular telephone to answer an incoming fax job and to dial a fax
	number.
	• Touch # 0 on the numeric keypad to go directly to the Manual Fax function.
	• Off is the factory default setting.
Memory Use	Define the allocation of non-volatile memory between sending and receiving fax jobs.
All receive	Notes:
Mostly receive
	• Equal is the factory default setting. Equal splits the memory for sending and
Equal
	receiving fax jobs into equal amounts.
Mostly send
	• Mostly send specifies that most of the memory is set to send fax jobs.
All send
	• All send specifies that all the memory is set to send fax jobs.
	• All receive specifies that all the memory is set to receive fax jobs.
	• Mostly receive specifies that most of the memory is set to receive fax jobs.
Cancel Faxes	Specify whether the printer cancels fax jobs.
Allow	Note: Allow is the factory default setting.
Don't Allow
Caller ID	Specify the type of caller ID being used.
Off
Primary
Alternate
Fax number masking	Specify the direction from where digits are masked in an outgoing fax number.
Off	Notes:
From left
	• The number of characters masked is determined by the Digits to Mask setting.
From right
	• Off is the factory default setting.
Digits to Mask	Specify the number of digits to mask in an outgoing fax number.
0–58	Note: 0 is the factory default setting.