Lexmark 436, 236, 036 manual Understanding the printer menus 153

Understanding the printer menus		153
	Use	To
	Audio Feedback	Set the audio volume for the buttons.
	Button Feedback	Notes:
	On
		• On is the factory default setting for Button Feedback.
	Off
		• 5 is the factory default setting for Volume.
	Volume
	1–10
	Show Bookmarks	Specify whether bookmarks are displayed from the Held Jobs area.
	Yes	Note: Yes is the factory default setting.
	No
	Allow Background Removal	Specify whether image background removal is allowed in copy, fax,
	On	e‑mail, FTP, or scan‑to‑USB jobs.
	Off	Note: On is the factory default setting. The background of the
		image is removed.
	Allow Custom Job Scans	Scan multiple jobs to one file.
	On	Note: On is the factory default setting. If On is selected, then the
	Off	Allow Custom Job Scans setting can be enabled for specific jobs.
	Scanner Jam Recovery	Specify how a scanned job should be reloaded if a paper jam occurs
	Job level	in the ADF.
	Page level	Notes:
		• Job level is the factory default setting. If selected, then the
		entire job must be rescanned if any pages jam.
		• If Page level is selected, then rescan from the jammed page
		forward.
	Web Page Refresh Rate	Specify the number of seconds between Embedded Web Server
	30–300	refreshes.
		Note: 120 is the factory default setting.
	Contact Name	Specify a contact name for the printer.
		Note: The contact name is stored on the Embedded Web Server.
	Location	Specify the location of the printer.
		Note: The location is stored on the Embedded Web Server.
	Alarms	Set an alarm when the printer requires user intervention.
	Alarm Control	For each alarm type, select from the following options:
	Cartridge Alarm	Off
	Staple Alarm	Single
	Hole Punch Alarm	Continuous
		Notes:
		• Single is the factory default setting for Alarm Control. Single
		sounds three quick beeps.
		• Off is the factory default setting for Cartridge Alarm, Staple
		Alarm, and Hole Punch Alarm.
		• Continuous repeats three beeps every 10 seconds.