Lexmark 436, 236, 036 manual Sending a fax, Configuring the printer to observe daylight saving time

Faxing 105

Notes:

•View the IP address on the home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Settings > Security > Set Date and Time.

3In the Manually Set Date & Time field, enter the current date and time. Note: The use of network time is recommended.

4Click Submit.

Configuring the printer to observe daylight saving time

The printer can be set to automatically adjust for daylight saving time.

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Settings > Security > Set Date and Time.

3Click the Automatically Observe DST check box.

4In the Custom Time Zone Setup section, set the DST start and end dates.

5Click Submit.

Sending a fax

Sending a fax using the control panel

1Load an original document into the ADF tray or on the scanner glass.

2From the home screen, touch Fax, and then enter the fax number.

Notes:

•You can also enter the recipient using the shortcut number or address book.

•To add recipients, touch Next number.

3Touch Fax It.