Lexmark 236, 436, 036 manual Print is too light, Troubleshooting 310

Troubleshooting		310
Action	Yes	No
Step 5	Go to step 6.	The problem is solved.

aLoad paper from a fresh package.

Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it.

bResend the print job.

Is the print still too dark?

Step 6 Go to step 7. The problem is solved.

aClean the charger and the printhead lens.

bResend the print job.

Is the print still too dark?
Step 7	Contact customer	The problem is solved.
Replace the photoconductor unit, and then resend the print job.	support.
Warning—Potential Damage: Do not expose the photoconductor unit
to direct light for more than 10 minutes. Extended exposure to light can
cause print quality problems.
Is the print still too dark?

Print is too light

Action	Yes	No
Step 1	Go to step 2.	The problem is solved.

aFrom the Quality menu on the control panel, increase the toner darkness.

Note: 8 is the factory default setting.

bResend the print job.

Is the print still too light?
Step 2	Go to step 3.	Change the paper type,
From the control panel, set the paper type, texture, and weight in the		texture, and weight to
Paper menu to match the paper loaded in the tray.		match the paper
		loaded in the tray.
Is the tray set to the type, texture, and weight of the paper loaded?