Lexmark 036, 436, 236 manual Smtp Setup menu, Understanding the printer menus 140

Understanding the printer menus 140

Use

Baud

1200

2400

4800

9600

19200

38400

57600

115200

138200

172800

230400

345600

Data Bits

7

8

Parity

Even

Odd

None

Ignore

Honor DSR

On

Off

To

Specify the rate at which data can be received through the serial port.

Notes:

•9600 is the factory default setting.

•138200, 172800, 230400, and 345600 baud rates are only displayed in the Standard Serial menu. These settings do not appear in the Serial Option 1, Serial Option 2, or Serial Option 3 menus.

Specify the number of data bits sent in each transmission frame.

Note: 8 is the factory default setting.

Set the parity for serial input and output data frames.

Note: None is the factory default setting.

Determine whether the printer uses the DSR Signal.

Notes:

•Off is the factory default setting.

•DSR is a handshaking signal used by most serial cables. The serial port uses DSR to distinguish data sent by the computer from data created by electrical noise in the serial cable. The electrical noise can cause stray characters to print. Set this to On to prevent stray characters from printing.

SMTP Setup menu

Use	To
Primary SMTP Gateway	Specify SMTP server gateway and port information.
	Note: 25 is the default SMTP gateway port.
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
SMTP Timeout	Specify the amount of time in seconds before the server stops trying to
5–30	send an e‑mail.
	Note: 30 seconds is the factory default setting.
Reply Address	Specify a reply address of up to 128 characters in the e-mail sent by the
	printer.