Lexmark 036, 436, 236 manual Insert hole punch box, Insert Tray, Insufficient memory to collate job

Troubleshooting 275

Insert hole punch box

Insert the hole punch box into the finisher, and then touch Continue to clear the message.

Insert Tray [x]

Try one or more of the following:

•Insert the specified tray into the printer.

•Cancel the print job.

•Reset the active bin for a linked set of bins by selecting Reset active bin on the printer control panel.

Insufficient memory for Flash Memory Defragment operation [37]

Try one or more of the following:

•From the printer control panel, touch Continue to stop the defragmentation and continue printing.

•Delete fonts, macros, and other data in the printer memory.

•Install additional printer memory.

Insufficient memory to collate job [37]

Try one or more of the following:

•From the printer control panel, touch Continue to print the part of the job already stored and begin collating the rest of the print job.

•Cancel the current print job.

Insufficient memory to support Resource Save feature [35]

Install additional printer memory or touch Continue to disable Resource Save, clear the message, and continue printing.

Insufficient memory, some Held Jobs were deleted [37]

From the printer control panel, touch Continue to clear the message.

Insufficient memory, some held jobs will not be restored [37]

Try one or more of the following:

•From the printer control panel, touch Continue to clear the message.

•Delete other held jobs to free up additional printer memory.

Insufficient space between paper stacks in Tray 3

Move the paper stacks apart, and then touch Continue on the control panel to clear the message and continue printing.