Lexmark 236, 436, 036 manual Understanding the printer menus 154, Timeouts

Understanding the printer menus		154
	Use	To
	Timeouts	Specify the number of minutes of inactivity before the printer
	Standby Mode	enters a lower power state.
	Disabled	Note: 15 is the factory default setting.
	1–240
	Timeouts	Set the amount of time in minutes the printer waits after a job is
	Sleep Mode	printed before it goes into a reduced power state.
	Disabled	Notes:
	1–120	• 20 is the factory default setting.
		• Disabled appears only when Energy Conserve is set to Off.
		• Lower settings conserve more energy, but may require
		longer warm‑up times.
		• Select a high setting if the printer is in constant use. Under
		most circumstances, this keeps the printer ready to print
		with minimum warm‑up time.
	Timeouts	Allow the printer to print even when the display is off.
	Print with Display off	Note: Allow printing with display off is the factory default setting.
	Allow printing with display off
	Display on when printing
	Timeouts	Set the amount of time before the printer enters Hibernate mode.
	Hibernate Timeout	Note: 3 days is the factory default setting.
	Disabled
	1 hour
	2 hours
	3 hours
	6 hours
	1 day
	2 days
	3 days
	1 week
	2 weeks
	1 month
	Timeouts	Set the printer to Hibernate Timeout even when there is an active
	Hibernate Timeout on Connection	Ethernet connection.
	Do Not Hibernate	Note: Hibernate is the factory default setting.
	Hibernate
	Timeouts	Set the amount of time in seconds the printer waits before
	Screen Timeout	returning to Ready state.
	15–300	Note: 30 is the factory default setting.
	Timeouts	Set the printer to continue a specified job without returning to the
	Prolong Screen Timeout	home screen when the screen timeout timer expires.
	On	Note: Off is the factory default setting.
	Off