EtherFast® Series
Security Menu
The Security Menu is used to configure security options.
•MAC Filtering Configuration - Security filtering can be used to drop all the traffic from a host device based on a specified MAC address. Traffic with either a source or destination address listed in the MAC Filtering Configuration table will be filtered.
•Security Mode - Enable/disable the Learning mode here.
•IP Filtering Configuration - Configures IP filtering settings. (Only avail- able when the Switch is in multilayer mode)
Select OK to return to the previous panel.
EtherFast® Managed
MAC Filtering Configuration
The MAC Filtering Configuration screen allows you to filter out specified MAC addresses. Any node that presents a security risk or is malfunction- ing can be filtered from this Switch. Security filtering can be used to drop all the traffic from a host device based on a specified MAC address.
To add a MAC address, use Add. To delete an address, highlight it with the cursor and press Enter. Select Apply to make changes. Select OK to return to the previous panel. Select Prev Page to view the previous page. Select Next Page to view the next page. To display a specific page, set the page number in the Page field and then press Apply.
60 | 61 |
