Add Static Address Entry | Linksys Etherfast specification

EtherFast® Series

Add Static Address Entry

The Add Static Address Entry screen allows you to add static addresses for unicasting.

•Address - The MAC address of a host device attached to this Switch.

•Port - The switch port the host device is attached to.

Select OK to confirm the changes. Select Cancel to cancel any changes.

EtherFast® Managed 24-Port with Dual Gigabit Switch

Static Multicast Address Configuration

The Static Multicast Address Table can be used to assign a destination MAC address (and the corresponding ports) to the VLAN group used for a specific multicast service. Static multicast addresses are never aged out, and traffic with these addresses can only be forwarded to ports specified in this table.

•VLAN - The VLAN corresponding to this multicast service.

•Address - The destination MAC address for a multicast service.

•Port - The ports to which this multicast traffic can be forwarded. Read the numbers vertically; they range from 1-26. For each port number, there are two choices:

If the letter “M” is present, it indicates that the VLAN has access to messages transmitted by that particular port.

If there is no letter “M,” then there is no access to messages trans mitted by that particular port.

Select Apply to make changes. Select OK to return to the previous panel. Select Prev Page to view the previous page. Select Next Page to view the next page. To display a specific page, set the page number in the Page field and then press Apply.

38

39

Image 22

Linksys Etherfast manual Add Static Address Entry, Static Multicast Address Configuration

Contents

EtherFast Managed 24-Port With Dual Gigabit Switch Copyright & Trademarks Table of Contents Introduction Package Contents Getting to Know the SwitchLEDs Gigabit Ports RJ-45 PortsConsole Port Rack-Mounting the Switch Installing the SwitchPre-Installation Considerations Powering on the Switch Switch Management Overview Web Management Logging On to the Switch Configuring the SwitchMain Menu System Information Menu System Information Switch Information Management Setup Menu Network Configuration IP Configuration Http Configuration IP Connectivity Test Ping Serial Port Configuration Snmp Configuration Snmp Communities IP Trap Managers User Configuration Add User Configuration File Tftp Download Device Control Menu System Mode Layer 2 Menu Port Configuration Mirror Port Configuration Port Trunking Configuration Static Unicast Address Configuration Static Multicast Address Configuration Add Static Address Entry Add Multicast Address Entry Bridge Menu Bridge Configuration Spanning Tree Port Configuration Vlan Port Configuration Vlan Menu Vlan Table Configuration Vlan and Priority Subnet Configuration IP Menu Protocol Configuration Add Subnet ARP Configuration RIP Configuration Add Bootp Relay Server Bootp Relay Database ConfigurationStatic ARP Table Add Static ARP Entry Static Route Table Default Route Menu Add Routing Entry MAC Filtering Configuration Security Menu Add MAC Address Filter Security ModeIP Security Filtering Configuration Add IP Address Filter Igmp Snooping Configuration Network Monitor Menu Port Statistics Port Statistics/Statistics MenuInterfaces Group Ethernet-Like Rmon Statistics Layer 2 Address Table Spanning Tree Bridge Information Spanning Tree Port Information Vlan Information Vlan Dynamic Registration Information Vlan Forwarding Information IP Multicast Registration Table Subnet Information ARP Table Routing Table Multicast Table Menu Igmp Cache Multicast Forwarding Cache Dvmrp Routing Table Dvmrp Neighbor Table System Restart Menu Common Problems and Solutions TroubleshootingExit Tion Appendix Your firmware has now been updatedUpgrading Firmware via the Serial Port Glossary 101 103 Warranty Information SpecificationsEnvironmental Sales Information Tech Support RMA Issues FaxContact Information Web FTP Site T p / / w w w. l i n k s y s . c o m