Linksys Etherfast

EtherFast

Managed 24-Port with Dual Gigabit Switch

Static ARPTable

The Static ARPTable screen is used to specify the static Address

Resolution Protocol.

• IPAddress - IP address statically mapped to a physical MAC address.

• MACAddress - MAC address statically mapped to the corresponding

IPaddress.

• Interface - The index number of the IP interface that will use this static

ARP entry. (Port “0” refers to the CPU.)

Select Applyto make changes. Select OK to return to the previous panel.

Select Prev Page to view the previous page. Select Next Page to view the

next page. To display a specific page, set the page number in the Page field

and then press Apply. Select Add to add a static ARP entry.

EtherFast

Series

BOOTPRelay Database Configuration

The BOOTP Relay Database Configuration screen allows you to

specify the IP address for a BOOTP relay server.

• Index Server Address - Used to define any preferred DHCP

servers or the outbound subnetwork for relaying a DHCP request

broadcast. (Up to five entries are permitted.)

Select OK to return to the previous panel. SelectAdd to add another entry.

Add BOOTPRelay Server

The Add BOOTP Relay Server screen allows you to add an entry.

• IP Address - IP address of server.

Select OK to return to the previous panel. Select Cancel to cancel any

changes.