Installing and configuring VCS 71

Installing and configuring VCS 5.0 RU3

See Veritas Cluster Server User's Guide for more information.

Adding VCS users

If you have enabled Symantec Product Authentication Service, you do not need to add VCS users now. Otherwise, on systems operating under an English locale, you can add VCS users at this time.

To add VCS users

1Review the required information to add VCS users.

2Reset the password for the Admin user, if necessary.

Do you want to set the password for the Admin user (default password=’password’)? [y,n,q] (n) y

Enter New Password:******

Enter Again:******

3To add a user, enter y at the prompt.

Do you want to add another user to the cluster? [y,n,q] (y)

4Enter the user’s name, password, and level of privileges.

Enter the user name: [?] smith

Enter New Password:*******

Enter Again:*******

Enter the privilege for user smith (A=Administrator, O=Operator, G=Guest): [?] a

5Enter n at the prompt if you have finished adding users.

Would you like to add another user? [y,n,q] (n)

6Review the summary of the newly added users and confirm the information.

Configuring SMTP email notification

You can choose to configure VCS to send event notifications to SMTP email services. You need to provide the SMTP server name and email addresses of people to be notified. Note that you can also configure the notification after installation.

Page 71
Image 71
Symantec 5 manual Adding VCS users, Configuring Smtp email notification, To add a user, enter y at the prompt