Symantec 5 manual Obtaining VCS license keys, Task Reference, Https//licensing.symantec.com

Preparing to install VCS 39

Performing preinstallation tasks

Table 3-2	Preinstallation tasks (continued)
Task	Reference

Review basic instructions to optimize LLT media speeds.

Review guidelines to help you set the LLT interconnects.

Mount the product disc

Verify the systems before installation

See “Optimizing LLT media speed settings on private NICs” on page 48.

See “Guidelines for setting the media speed of the LLT interconnects” on page 48.

See “Mounting the product disc” on page 49.

See “Performing automated pre-installation check” on page 49.

Obtaining VCS license keys

This product includes a License Key certificate. The certificate specifies the product keys and the number of product licenses purchased. A single key lets you install the product on the number and type of systems for which you purchased the license. A key may enable the operation of more products than are specified on the certificate. However, you are legally limited to the number of product licenses purchased. The product installation procedure describes how to activate the key.

To register and receive a software license key, go to the Symantec Licensing Portal at the following location:

https://licensing.symantec.com

Make sure you have your Software Product License document. You need information in this document to retrieve and manage license keys for your Symantec product. After you receive the license key, you can install the product.

Click the Help link at this site to access the License Portal User Guide and FAQ.

The VRTSvlic package enables product licensing. After the VRTSvlic is installed, the following commands and their manual pages are available on the system:

vxlicinst	Installs a license key for a Symantec product
vxlicrep	Displays currently installed licenses
vxlictest	Retrieves the features and their descriptions that are encoded in a
	license key