Symantec 5 manual Configuring the shared storage, Bringing up the existing node

Installing VCS on a single node 145

Adding a node to a single-node cluster

To install and configure Ethernet cards for private network

1Shut down VCS on Node A.

# hastop -local

2Shut down the node to get to the OK prompt:

# shutdown -r now

3Install the Ethernet card on Node A.

If you want to use aggregated interface to set up private network, configure aggregated interface.

4Install the Ethernet card on Node B.

If you want to use aggregated interface to set up private network, configure aggregated interface.

5Configure the Ethernet card on both nodes.

6Make the two Ethernet cable connections from Node A to Node B for the private networks.

7Restart the nodes.

Configuring the shared storage

Make the connection to shared storage from Node B. Configure VxVM on Node B and reboot the node when you are prompted.

See “Setting up shared storage” on page 46.

Bringing up the existing node

Bring up the node.

To bring up the node

1Restart Node A.

2Log in as superuser.

3Make the VCS configuration writable.

# haconf -makerw

4Display the service groups currently configured.

#hagrp -list