66Installing and configuring VCS Installing and configuring VCS 5.0 RU3

To install VCS packages now and configure VCS later

1If you do not want to configure VCS now, enter n at the prompt.

Are you ready to configure VCS? [y,n,q] (y) n

The utility checks for the required file system space and makes sure that any processes that are running do not conflict with the installation. If requirements for installation are not met, the utility stops and indicates the actions required to proceed with the process.

2Review the output as the installer uninstalls any previous versions and installs the VCS 5.0 RU3 packages.

3Configure the cluster later.

See “Configuring VCS using configure option” on page 59.

Starting the software configuration

You can configure VCS using the Veritas product installer or the installvcs program.

To configure VCS using the product installer

1Confirm that you are logged in as the superuser and mounted the product disc.

2Start the installer.

# ./installer

The installer starts the product installation program with a copyright message and specifies the directory where the logs are created.

3From the opening Selection Menu, choose: C for "Configure an Installed Product."

4From the displayed list of products to configure, choose: Veritas Cluster Server.

Page 66
Image 66
Symantec 5 manual Starting the software configuration, See Configuring VCS using configure option on