Symantec 5 manual Venus # vssat showalltrustedcreds, Venus # vssat showprpl --pdrtype root

34Preparing to install VCS

Preparing to configure the clusters in secure mode

9Enter y when the installer prompts you to configure the Symantec Product Authentication Service.

10Press the Enter key to start the Authentication Server processes.

Do you want to start Symantec Product Authentication Service processes now? [y,n,q] y

11Enter an encryption key. Make sure that you enter a minimum of five characters.

You must use this encrypted key with the -enckeyfileoption when you use the -responsefileoption for installation.

12Press Enter to continue and review the output as the installer displays the location of the installation log files, summary file, and the response file.

Creating authentication broker accounts on root broker system

On the root broker system, the administrator must create an authentication broker (AB) account for each node in the cluster.

To create authentication broker accounts on root broker system

1Determine the root broker domain name. Enter the following command on the root broker system:

venus> # vssat showalltrustedcreds

For example, the domain name resembles "Domain Name: root@venus.symantecexample.com" in the output.

2For each node in the cluster, verify whether an account exists on the root broker system.

For example, to verify that an account exists for node galaxy:

venus> # vssat showprpl --pdrtype root \

--domain root@venus.symantecexample.com --prplname galaxy

■If the output displays the principal account on root broker for the authentication broker on the node, then delete the existing principal accounts. For example:

venus> # vssat deleteprpl --pdrtype root \ --domain root@venus.symantecexample.com \ --prplname galaxy --silent