Symantec 5 manual Adding a license key, Checking licensing information on the system

Adding and removing cluster nodes	125
Adding a node to a cluster

#rpm -i VRTScutil-5.0.33.00-RU3_GENERIC.noarch.rpm

#rpm -i VRTSatClient-4.3.28.0-0.ppc.rpm

#rpm -i VRTSatServer-4.3.28.0-0.ppc.rpm

■SLES10/ppc64, required RPMS

#rpm -i VRTSvlic-3.02.33.4-0.ppc64.rpm

#rpm -i VRTSperl-5.10.0.1-SLES10.ppc64.rpm

#rpm -i VRTSspt-5.5.00.0-GA.noarch.rpm

#rpm -i VRTSllt-5.0.33.00-RU3_SLES10.ppc64.rpm

#rpm -i VRTSgab-5.0.33.00-RU3_SLES10.ppc64.rpm

#rpm -i VRTSvxfen-5.0.33.00-RU3_SLES10.ppc64.rpm

#rpm -i VRTSvcs-5.0.33.00-RU3_SLES10.ppc64.rpm

#rpm -i VRTSvcsag-5.0.33.00-RU3_SLES10.ppc64.rpm

#rpm -i VRTSvcsdr-5.0.33.00-RU3_SLES10.ppc64.rpm

#rpm -i VRTScutil-5.0.33.00-RU3_GENERIC.noarch.rpm

#rpm -i VRTSatClient-4.3.28.0-0.ppc.rpm

#rpm -i VRTSatServer-4.3.28.0-0.ppc.rpm

Adding a license key

After you have installed all RPMs on each cluster node, use the vxlicinst command to add the VCS license key on each system:

#cd /opt/VRTS/bin

#./vxlicinst -k XXXX-XXXX-XXXX-XXXX-XXXX-XXX

Checking licensing information on the system

Use the vxlicrep utility to display information about all Veritas licenses on a system. For example, enter:

#cd /opt/VRTS/bin

#./vxlicrep

From the output, you can determine the license key, the type of license, the product for which it applies, and its expiration date, if any. Demo keys have expiration dates, while permanent keys and site keys do not.